Indexable Mill Drills, Pocket & Profile Cutters

Cutting Tools

coolant_delivery

cutting_edge_angle

depth_of_cut

head_type

height

insert_size

insert_style

maximum_cutting_diameter

milling_application

overall_lengthmm

series

shank_diameter

shank_thread_size

shank_type

toolholder_style

brand

categoryId

stockStatus

Milling

Indexable Bodies

Iscar

The new HeliPlus. All milling cutters are coated with a hard nickel coating called HARD TOUCH that protects the cutter body from wear and tear increasing tool body life. For high precision and super finish milling, HELIPLUS is another advanced design from the world-famous ISCAR HELIMILL family, featuring high 90 shoulder accuracy with no mismatch, leaving a clean mirror-like side wall.

HP ANKT 0702.. Insert
The Heliplus 07 insert is another extension of the HELI2000 family, the full designation is HP ANKT 0702. This insert features a shorter cutting edge of 7mm. The high tooth density enables machining at a very high table feed, resulting in high productivity. This is supported by a very strong insert and pocket design enabling the cutter to be maximised to its full potential.

Features:
Insert and pocket design enable machining at very high table feed for applications with up to 7mm depth-of-cut.
The insert is very strong and durable and available in the very latest sub micron carbide grades specifically designed for arduous milling applications. 
The tool and insert tolerances are very tight, minimising machined surface mismatch and provide very accurate shoulder and 90 slot wall angle. 
Very high surface finishes can be achieved.
Weldon shanks without coolant holes and cylindrical shank with coolant holes to assist in swarf removal when pocketing. 
The tools can ramp down within the catalogue specification.
Available are regular and fine pitch tools with a higher tooth density than those available with ISCAR current tool families enabling much higher productivity to be achieved.

For full specifications please refer to our catalogue.

Iscar HeliPlus Milling Cutters

HP-E90AN-D16-4-W16-07 MILLING CUTTER

HP-E90AN-D20-4-C19-07-C-B MILLING CUTTER

HP E90AN D20-4-C20-07-C HOLDER

HP-E90AN-D20-5-C20-07-C MILLING CUTTER

HP-E90AN-D20-5-W20-07 MILLING CUTTER

HP-E90AN-D25-5-C20-07-C MILLINGCUTTER

HP-E90AN-D25-5-C24-07-C-B MILLING CUTTER

HP-E90AN-D25-7-C20-07-C MILLING CUTTER

HP-E90AN-D32-6-C31-07-C-B MILLING CUTTER

HP-E90AN-D32-8-C25-07-C MILLING CUTTER

The T290 ELN endmills can be used for machining 90 shoulders
at high rates, with no mismatch and are capable of plunging as well.

All of the tools have coolant holes.

For all technical and dimensional specifications please refer to our catalogue.

Iscar is introducing a new family of milling tools that use tangentially clamped inserts with two helical cutting edges. TheT290 LNMT....TR inserts are the next evolution of Iscar's most popular HELIMILL? inserts.

These new SumoMill? T290 inserts are available in cutting edge lengths of 5 and 10mm. As a result of their tangential orientation in the pocket, the inserts enable tool design with larger core diameters than tools with regular, radially oriented inserts. 

This provides a much stronger tool construction, which sustains a higher impact load and reduces the risk of fracture to a minimum.

Advantages
Tangential clamping mechanism enables the resultant cutting force to be transmitted directly to the cutter body, without applying or adding any undesired stress to the tightening screw. The tangential clamping configuration also offers a higher insert density.

Designed with axial and tangential angles that are significantly larger, in comparison to other tools that utilise conventional laydown inserts. This unique design leads to a major reduction in cutting forces, improves tool stability and prolongs life of the cutting edge.

High feed rates combined with a large number of of cutting edges deliver more output and increase productivity. 

The SumoMill T290 convex shaped insert with its unique tangential orientation enabled the development of small diameter cutting tools of even 8mm diameter.
The stable condition during the cutting operation prolongs tool life and improves the obtained surface finish.

The SumoMill T290 is the only tool available in the market that is capable of performing rampdown milling operations with tangential inserts.

For all technical and dimensional specifications please refer to our catalogue.

Iscar Indexable Face & End Mills

T290 ELN D08-01-C08-05 END MILL

T290 ELN D10-02-C10-05 END MILL

T290 ELN D10-02-MMT06-05END MILL

T290 ELN D12-02-C12-05 END MILL

T290 ELN D12-03-C12-05 END MILL

T290 ELN D12-03-MMT08-05END MILL

T290 ELN D14-03-C14-05 END MILL

T290 ELN D16-04-C16-05 END MILL

T290 ELN D20-02-C20-10 END MILL

T290 ELN D20-03-C20-10 END MILL

T290 ELN D25-04-C25-10 END MILL

T290 ELN D32-05-C32-10 END MILL

FFV-D-R-VN07 
Fast feed shell mill, carrying tangentially clamped inserts with 4 cutting edges. 

• 16˚ lead angle
• Strong dovetailed insert clamping
• Coolant holes directed effectively to the cutting zone
• New polished coating for smooth chip flow and protection against corrosion and wear
• Radius for programming: - R2.8 mm
• Ramp down and side plunging capability
• Excellent chip flow
• High metal removal rate due to small entrance angle, which enables high table feed at shallow depths of cut
• Rough- and -semi-finish milling of sculptured surfaces and steep profiles including up and down-ramping.





FFV-D-R-VN07 Fast Feed Shell Mill 

FFV D040-03-16-R-VN07 40.00mm Fast Feed Shell Mill

FFV D050-05-22-R-VN07 50.00mm Fast Feed Shell Mill

FFV D063-06-22-R-VN07 63.00mm Fast Feed Shell Mill

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Indexable Mill Drills, Pocket & Profile Cutters

Iscar

HP-E90AN-D16-4-W16-07 MILLING CUTTER

19 Variations

Iscar

HP-E90AN-D20-4-C19-07-C-B MILLING CUTTER

19 Variations

Iscar

HP E90AN D20-4-C20-07-C HOLDER

19 Variations

Iscar

HP-E90AN-D20-5-C20-07-C MILLING CUTTER

19 Variations

Iscar

HP-E90AN-D20-5-W20-07 MILLING CUTTER

19 Variations

Iscar

HP-E90AN-D25-5-C20-07-C MILLINGCUTTER

19 Variations

Iscar

HP-E90AN-D25-5-C24-07-C-B MILLING CUTTER

19 Variations

Iscar

HP-E90AN-D25-7-C20-07-C MILLING CUTTER

19 Variations

Iscar

HP-E90AN-D32-6-C31-07-C-B MILLING CUTTER

19 Variations

Iscar

HP-E90AN-D32-8-C25-07-C MILLING CUTTER

19 Variations

Iscar

T290 ELN D08-01-C08-05 END MILL

13 Variations

Iscar

T290 ELN D10-02-C10-05 END MILL

13 Variations

Iscar

T290 ELN D10-02-MMT06-05END MILL

13 Variations

Iscar

T290 ELN D12-02-C12-05 END MILL

13 Variations

Iscar

T290 ELN D12-03-C12-05 END MILL

13 Variations

Iscar

T290 ELN D12-03-MMT08-05END MILL

13 Variations

Iscar

T290 ELN D14-03-C14-05 END MILL

13 Variations

Iscar

T290 ELN D16-04-C16-05 END MILL

13 Variations

Iscar

T290 ELN D20-02-C20-10 END MILL

13 Variations

Iscar

T290 ELN D20-03-C20-10 END MILL

13 Variations

Iscar

T290 ELN D25-04-C25-10 END MILL

13 Variations

Iscar

T290 ELN D32-05-C32-10 END MILL

13 Variations

Iscar

FFV D040-03-16-R-VN07 40.00mm Fast Feed Shell Mill

5 Variations

Iscar

FFV D050-05-22-R-VN07 50.00mm Fast Feed Shell Mill

5 Variations

Iscar