Grooving Inserts

Cutting Tools

cutting_application

cutting_direction

depth_of_cutmm

manufacturer_grade

material

series

brand

categoryId

stockStatus

Parting & Grooving

Inserts & Blades

Iscar

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Features and Benefits
• A hard, fine grain substrate with excellent chipping resistance
• New TiAlN PVD coating for added durability
• Provides high wear and oxidation resistance
• Recommended for a wide range of materials applications and machining conditions

Specifications
• Grade: IC908
• ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
• ISO Range - H/S/N: (H10-H20)(S10-S25)
• Grade or Coating Type: PVD
• Coating Layers: TiAlN

Typical Applications
• Parting
• Grooving

Iscar DO-GRIP Parting & Grooving Inserts

Do-Grip, Grooving Insert, DGN 3002Z, Grade IC908

First choice for soft materials, parting of tubes, small diameters and thin walled parts. Cutting edge with positive rake. General application on low carbon steel, alloy steel, austenitic stainless steel.

IC20 (K10-K20).
Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.

Iscar DO-GRIP Parting & Grooving Inserts - IC20 (K10-K20)

Do-Grip, Grooving Insert, DGN 3102C, Grade IC20

Do-Grip, Grooving Insert, DGN 4003C, Grade IC20

First choice for the parting of bars, hard materials and tough applications. A positive rake single cavity with negative hand and shoulders, provides extra cutting-edge strength. Medium to low feeds.

Do-Grip, Grooving Insert, DGN 4003C, Grade IC908

PVD coated for semi-roughing and interrupted cutting medium speed, high feed. Suitable for use on carbon, alloy and stainless steels.

Iscar DO-GRIP Parting & Grooving Inserts - IC354 (P20-P40, M10-M30)

DGN 4003J INSERT GRADE IC354

Do-Grip, Grooving Insert, DGNC 3102C, Grade IC908

These are double-ended inserts that are ideal for turning and grooving. They are designed for use in external, internal and face applications. The carbide grade, uncoated fine grain on the insert is ideal for a wide range of applications, including high temperature alloys at low to medium cutting speed. They all have high levels of durability and wear resistance. 

Features and Benefits
• Broad range of inserts
• Versatile usage on a range of metals
• Double-ended inserts

Typical Applications
• Wide range of metals at various speeds depending on the grade

Grip Inserts

GRIP 3002Y INSERT GRADE IC08

GRIP 5005Y INSERT GRADE I C908

GRIP (full radius) : Full radius, double-ended inserts, for turning and grooving in external, internal and face applications. 
For External, Internal & Face Machining

Grade: IC08
An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed.
ISO Range - P/M/K: (M20-M30)
ISO Range - H/S/N: (S10-S30)(N10-N20)
Grade or Coating Type: UN-COATED
Coating Layers: Uncoated

Grade: IC808
A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.
ISO Range - P/M/K: (P15-P30)(M20-M30)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN/AlTiN+TiN

Grade: IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)  
Grade or Coating Type: PVD  
Coating Layers: TiCN

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

Grade: IC9025	
A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance.
ISO Range - P/M/K: (P20-P30)(M15-M30)
Grade or Coating Type: CVD
Coating Layers: TiCN+Al2O3+TiN
Grade: IC418
CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining.
ISO Range - P/M/K: (K10-K25)
Grade or Coating Type: CVD
Coating Layers: TiC+Al2O3

Grade: IC830
A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance.
ISO Range - P/M/K: (P20-P40)(M25-M35)
ISO Range - H/S/N: (S15-S30)
Grade or Coating Type: PVD
Coating Layers: AlTiN+TiN

Grade: IC418
CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining.
ISO Range - P/M/K: (K10-K25)
Grade or Coating Type: CVD
Coating Layers: TiC+Al2O3

GRIP_Y (Full Radius) Inserts

GRIP 6030Y INSERT GRADE IC830

HFPR/L : Utility double-ended face machining inserts.

Grade : IC20
Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade.
ISO Range - P/M/K: (M10-M25)(K10-K20)
ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25)
Grade or Coating Type: UN-COATED
Coating Layers: Uncoated 

Grade : IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)
Grade or Coating Type: PVD
Coating Layers: TiCN 

Grade : IC808
A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.
ISO Range - P/M/K: (P15-P30)(M20-M30)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN/AlTiN+TiN 

Grade : IC328
A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.
ISO Range - P/M/K: (P25-P40)(M30-M40)
ISO Range - H/S/N: (S20-S30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade : IC9015
A hard substrate with a cobalt enriched layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to chipping and plastic deformation. Recommended for high speed machining of steel at stable conditions.
ISO Range - P/M/K: (P10-P30)(K10-K15)
Grade or Coating Type: CVD
Coating Layers: TiCN+Al2O3+TiN

Grade : IC428
For wide range of applications, maching conditions and materials. For turning cast iron.
ISO Range - P/M/K: (P05-P15)(K05-K20)
ISO Range - H/S/N: (H15-H25)
Grade or Coating Type: CVD
Coating Layers: TiC+Al2O3

Grade : IC8250
A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance.
ISO Range - P/M/K: (P10-P35)(M05-M20)
Grade or Coating Type: CVD
Coating Layers: TiCN+Al2O3+TiN

HFPR/L Inserts

HFPR 3003 INSERT GRADE IC 20

HFPL 4004 INSERT GRADE IC 20

ISCAR has developed a new insert designated PENTACUT, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique J-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.

For all dimensional and technical specifications please refer to our catalogue.

Penta 24N - Precision Grooving, Part & Recessing

PENTA 24N315J015 INSERT GRADE IC908

Penta R/L - Parting & Grooving

PENTA 24R150J06D INSERT GRADE IC1008

Sandvik Coromant

N151 T-MaxⓇ Q-Cut Grooving Insert 

Insert Grade 2135

N151 T-MaxⓇ Q-Cut Grooving Insert Grade 2135

N151.3-300-25-7G INSERT GRADE 2135

N123H2 CoroCutⓇ 1-2 Profiling Inserts Grade 1125

N123H2-0475-RM INSERT GRADE 1125

N123L2 CoroCutⓇ 1-2 Grooving Inserts Grade 1125

N123L2-0792-0008-GF INSERT GRADE 1125

N123T3 CoroCutⓇ 3 Grooving Inserts 

Insert Grade 1125

N123T3 CoroCutⓇ 3 Grooving Inserts Grade 1125

N123T3-0250-0000-GS INSERT GRADE 1125

CXS- 06F CoroTurnⓇ XS Solid Carbide Tool For Face Grooving

Within the Sandvik CoroTurn XS range of tooling you will find boring bars in different outer diameters adapted for different machine types. The assortment also consists of shank holders for internal machining, sliding head machines and Coromant Capto cutting units for turning and rotating applications.

For Internal Turning, Grooving & Threading of Small Bores down to 0.3mm
CoroTurn XS Tooling
The system consists of inserts in grade GC1025 for:
Turning.
Turning copying.
Grooving.
Face grooving.
Profiling full radius.
Pre-parting.
Threading.

CoroTurn XS Assortment
The programme consists of four different insert sizes.
CoroTurn XS Precision
The insert locates precisely into the boring bar thanks to a locating pin which locks the insert into the correct orientation.
CoroTurn XS Coolant Supply
The boring bars are designed with internal cutting fluid supply.
CoroTurn XS Grooving
All grooving inserts produce grooves with flat bottom and sharp corner radii.

CXS-06F CoroTurnⓇ XS Solid Carbide Tool For Face Grooving Grade  1025


CXS-06F150-6215AL INSERT GRADE 1025

CXS-06F200-6215AL INSERT GRADE 1025

CXS-06F250-6215AL INSERT GRADE 1025

CXS-06F300-6215AL INSERT GRADE 1025

CXS-08F CoroTurnⓇ XS Solid Carbide Tool For Face Grooving

Within the Sandvik CoroTurn XS range of tooling you will find boring bars in different outer diameters adapted for different machine types. The assortment also consists of shank holders for internal machining, sliding head machines and Coromant Capto cutting units for turning and rotating applications.

For Internal Turning, Grooving & Threading of Small Bores down to 0.3mm
CoroTurn XS Tooling
The system consists of inserts in grade GC1025 for:
Turning.
Turning copying.
Grooving.
Face grooving.
Profiling full radius.
Pre-parting.
Threading.

CoroTurn XS Assortment
The programme consists of four different insert sizes.
CoroTurn XS Precision
The insert locates precisely into the boring bar thanks to a locating pin which locks the insert into the correct orientation.
CoroTurn XS Coolant Supply
The boring bars are designed with internal cutting fluid supply.
CoroTurn XS Grooving
All grooving inserts produce grooves with flat bottom and sharp corner radii.

CXS-08F CoroTurnⓇ XS Solid Carbide Tool For Face Grooving Grade 1025

CXS-08F200-8015AR INSERT GRADE 1025

CXS-08F300-8010AR INSERT GRADE 1025

CXS-10F CoroTurnⓇ XS Solid Carbide Tool For Face Grooving 

Within the Sandvik CoroTurn XS range of tooling you will find boring bars in different outer diameters adapted for different machine types. The assortment also consists of shank holders for internal machining, sliding head machines and Coromant Capto cutting units for turning and rotating applications.

For Internal Turning, Grooving & Threading of Small Bores down to 0.3mm
CoroTurn XS Tooling
The system consists of inserts in grade GC1025 for:
Turning.
Turning copying.
Grooving.
Face grooving.
Profiling full radius.
Pre-parting.
Threading.

CoroTurn XS Assortment
The programme consists of four different insert sizes.
CoroTurn XS Precision
The insert locates precisely into the boring bar thanks to a locating pin which locks the insert into the correct orientation.
CoroTurn XS Coolant Supply
The boring bars are designed with internal cutting fluid supply.
CoroTurn XS Grooving
All grooving inserts produce grooves with flat bottom and sharp corner radii.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Grooving Inserts

Iscar

Do-Grip, Grooving Insert, DGN 3002Z, Grade IC908

10 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3102C, Grade IC20

13 Variations

Iscar

Do-Grip, Grooving Insert, DGN 4003C, Grade IC20

13 Variations

Iscar

Do-Grip, Grooving Insert, DGN 4003C, Grade IC908

10 Variations

Iscar

DGN 4003J INSERT GRADE IC354

15 Variations

Iscar

Do-Grip, Grooving Insert, DGNC 3102C, Grade IC908

10 Variations

Iscar

GRIP 3002Y INSERT GRADE IC08

27 Variations

Iscar

GRIP 5005Y INSERT GRADE I C908

27 Variations

Iscar

GRIP 6030Y INSERT GRADE IC830

13 Variations

Iscar

HFPR 3003 INSERT GRADE IC 20

25 Variations

Iscar

HFPL 4004 INSERT GRADE IC 20

25 Variations

Iscar

PENTA 24N315J015 INSERT GRADE IC908

26 Variations

Iscar

PENTA 24R150J06D INSERT GRADE IC1008

9 Variations

Sandvik Coromant

N151.3-300-25-7G INSERT GRADE 2135

6 Variations

Sandvik Coromant

N123H2-0475-RM INSERT GRADE 1125

5 Variations

Sandvik Coromant

N123L2-0792-0008-GF INSERT GRADE 1125

3 Variations

Sandvik Coromant

N123T3-0250-0000-GS INSERT GRADE 1125

17 Variations

Sandvik Coromant

CXS-06F150-6215AL INSERT GRADE 1025

18 Variations

Sandvik Coromant

CXS-06F200-6215AL INSERT GRADE 1025

18 Variations

Sandvik Coromant

CXS-06F250-6215AL INSERT GRADE 1025

18 Variations

Sandvik Coromant

CXS-06F300-6215AL INSERT GRADE 1025

18 Variations

Sandvik Coromant

CXS-08F200-8015AR INSERT GRADE 1025

12 Variations

Sandvik Coromant

CXS-08F300-8010AR INSERT GRADE 1025

12 Variations

Sandvik Coromant

CXS-10F300-10030AR INSERT GRADE 1025

18 Variations

Sandvik Coromant