Replaceable Insert Drill Inserts

Cutting Tools

diameter

drilling_system

finishcoating

geometry

insert_size

insert_style

iso_category_grade

manufacturer_grade

material

point_angle

series

shape

brand

categoryId

stockStatus

Drilling

Replaceable Insert Drilling

Iscar

SOMT-DT: Inserts with a DT chipformer for DR drills, for general applications at medium-to-high feed rates. 

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD

Grade: IC808
A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.
ISO Range - P/M/K: (P15-P30)(M20-M30)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN/AlTiN+TiN 

SOMT-DT Inserts

SOMT 09T306-DT INSERT GRADE IC908

SOMX-DT Inserts for DR drills with DT chipformer for medium-to-high feeds general use applications.

Features and Benefits
• Hard construction with excellent chipping resistance
• TiAlN PVD coating for prolonged tool life
• High wear and oxidation resistance

Grade : IC908
• ISO Range - P/M/K	(P15-P30)(M20-M30)(K20-K40)
• ISO Range - H/S/N 	(H10-H20)(S10-S25)
• Grade or Coating Type: PVD
• Coating Layers: TiAlN 

Typical applications
• Hole drilling
• Steel
• Cast iron

SOMX Inserts Grades IC908

SOMX 060304-DT INSERT GRADE IC908

IDI-SG CHAMDRILL general use DCM drill heads feature a hard substrate construction with excellent chipping resistance. The durable PVD TiAlN coating helps provide increased protection against oxidation and wear making them ideal for general machining applications and conditions.

Features and Benefits
• Durable hard substrate construction
• Excellent chipping resistance for general machining applications
• PVD TiAlN coating for excellent wear and oxidation resistance

Specifications
• Grade: IC908
• ISO range - P/M/K (P15-P30)(M20-M30)(K20-K40)
• ISO range - H/S/N (H10-H20)(S10-S25)
• Grade or coating type: PVD
• Coating layers: TiAlN 

Typical Applications
• Drilling
• General purpose machining

IDI-SG CHAMDRILL Drilling Inserts

IDI 100-SG CHAMDRILL INSERT GRADE IC908

IDI 165-SG CHAMDRILL INSERT GRADE IC908

SOMX 070305-DT INSERT GRADE IC908

Sandvik Coromant

CoroDrill® 880 P LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. These medium feed inserts are manufactured from a hard carbide substrate and feature a PVD TiAlN coating with sharp positive edge.

Features and Benefits
• Manufactured from a hard carbide substrate for toughness
• PVD TiAlN coating reduces wear due to heat and friction
• Sharp positive edge for improved cutting performance

Typical Applications
• Drilling 
• Medium feeds
 


CoroDrill® 880-P-LM Insert For Drilling Grade 4344


880-0704W10H-P-LM INSERT GRADE 4344

Allied Machine and Engineering

K20 Carbide
AM200® Coated

Available in TiN, TiCN and TiAIN as non stocked standards

4C21H Series 1 GEN2 T-A® Drill Inserts Carbide K20 (C2)

4C21H-20.5 20.50mm AM200 COAT INSERT

IDI 170-SG CHAMDRILL INSERT GRADE IC908

CoroDrill® 880-P-GM insert for drilling features GM geometry which is the basic choice for most materials. Ideal for operations at medium feeds the insert feature a hard carbide substrate and a PVD TiAlN  coating for improved heat and wear resistance. 

Features and Benefits
• Manufactured from a hard carbide substrate for toughness
• PVD TiAlN coating reduces wear due to heat and friction
• For use with general purpose applications and most materials at medium feeds

Typical Applications
• Drilling 
• Medium feeds
• General purpose apploications

CoroDrill® 880-P-GM Insert For Drilling Grade 4344


880-0403W05H-P-GM INSERT GRADE 4344

880-0503W05H-P-GM INSERT GRADE 4344

Insert size: 880.. 03 03 04H-C (Central insert). Geometry: -LM. Grade 1044: steel, stainless steel*, heat resistant material*.
*first choice

CoroDrill® 880-C-LM inserts feature a geometry ideal for long chipping materials, e.g. low carbon steel and stainless steels at medium feeds. The insert features a sharp positive edge with a hard carbide construction and PVD TIALN for excellent durability when faced with heat and wear.

Features and Benefits
• Hard carbide construction for increased rigidity
• LM geometry suited for long chipping materials
• Sharp positive edge for maximum cutting performance
• PVD TIALN coating for efficient heat and wear resistance

Standards
• Insert Usage Code - C
• Insert Grade 1044
• (P40)(M35)(K25)(N20)(S35)(H20) 

Typical Applications
• Low carbon steel
• Stainless steel

CoroDrill® 880-C-LM Drilling Insert Grade 1044 


880-03 03 05H-C-LM, Drilling Insert, Carbide, Grade 1044

HSS Super Cobalt
AM200® Coated

Available in TiN, TiCN and TiAIN as non stocked standards

452H Series 2 GEN2 T-A® Drill Inserts AM200 - Super Cobalt 

452H-26, Drill Insert, 26mm, Cobalt High Speed Steel, Grade AM200, GEN2 T-A, HSS, Super Cobalt

HSS CPM-M4
TiN Coated

Available in TiN, TiCN and TiAIN as non stocked standards

433T Allied Maxcut Series 3 Inserts - HSS CPM-M4

433T-47 47.00mm CPM-M4 HS S TIN INSERT

Series 4 GEN2 T-A® Drill Inserts HSS Super Cobalt AM200

Coating AM200®
•First choice for increased heat resistance over TiN, TiCN, and 
TiALN with improved wear capabilities
• Allows for improved tool life and higher penetration rates
•Over 20% increase in tool life compared to TiAlN coating
• Colour:  copper/bronze

454H Series 4 GEN2 T-A® Drill Inserts HSS Super Cobalt AM200 TiCN Coated 

454H-50, Drill Insert, 50mm, Cobalt High Speed Steel, Grade CPM-T15

CoroDrill® 880 Insert For Drilling

Insert Usage Code - P
Insert Grade 4334

Guide to Geometry/Feed: 
-GM geometry is the basic choice for most materials. Medium feed.
-LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge. 
-GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing.
-GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.


CoroDrill® 880-P - Insert For Drilling Grade 4334


880-0604W10H-P-GR INSERT GRADE 4334

880-0403W07H-P-LM INSERT GRADE 4344

Insert size: 880.. 02 02 04H-C (Central insert). Geometry: -LM. Grade 1044: steel, stainless steel*, heat resistant material*.
*first choice

880-02 02 04H-C-LM, Drilling Insert, Carbide, Grade 1044

CoroDrillⓇ 880 Drilling Inserts

Insert Grade 4344 

CoroDrillⓇ 880-P Drilling Inserts Grade 4344

880-0202 W05H-P LM INSERTGRADE 4344

CoroDrill® 880 Insert For Drilling

Insert Usage Code - P
Insert Grade 4344

Guide to Geometry/Feed: 
-GM geometry is the basic choice for most materials. Medium feed.
-LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge. 
-GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing.
-GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.


CoroDrill® 880-P - Insert For Drilling Grade 4344


880-03 03 W06H-P-LM INSERT GRADE 4344

Part of the CoroDrill® 880 series, these inserts are suited for drilling applications in steels and cast iron. Available in a range of sizes, the inserts are manufactured from grade 4334 carbide and have a TiCN, Al2O3 and TiN coating. The inserts can also be used for helical interpolation, boring, plunging and turning for versatility in use.

Features and Benefits
• Part of the CoroDrill 880 series which can also be used for helical interpolation, boring, plunging and turning
• Manufactured from grade 4334 carbide for ultimate durability
• Finished with a TiCN, Al2O3 and TiN coating for bolstered product longevity
• Available in a range of sizes and specifications to suit your exact application

Typical Applications
• Suited for use on steels including hardened and stainless steels as well as cast iron

CoroDrill® 880-P Drilling Inserts, Grade 4334


880-08 05W10H-P, Drilling Insert, Carbide, Grade 4334

Diameter Range 11.10 to 12.95mm
TiAlN Coated.
Grade: K20 (C2) Cobalt
Diameter: 12.00mm (0.4724")

1C2ZA Z Series Inserts - TiAlN

1C2ZA-12, Drill Insert, 12mm, Carbide, Grade K20

Size Range: 12.98 - 17.65mm Maximum. Minimum Order Quantity: Supplied in packs of 2 (packs cannot be split). Prices are for each insert.

150N Series 0 T-A® Original Drill Inserts HSS TiCN

150N-14, Drill Insert, 14mm, Cobalt High Speed Steel

4C20H Series 0 GEN2 T-A® Drill Inserts Carbide K20 (C2)

4C20H-14.5 14.50mm AM200COAT INSERT

4C20H-17, Drill Insert, 17mm, Carbide, Grade K20

HSS Super Cobalt
AM200® Coated.

Available in TiN, TiCN and TiAIN as non stocked standards

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Replaceable Insert Drill Inserts

Iscar

SOMT 09T306-DT INSERT GRADE IC908

5 Variations

Iscar

SOMX 060304-DT INSERT GRADE IC908

6 Variations

Iscar

IDI 100-SG CHAMDRILL INSERT GRADE IC908

31 Variations

Iscar

IDI 165-SG CHAMDRILL INSERT GRADE IC908

31 Variations

Iscar

SOMX 070305-DT INSERT GRADE IC908

6 Variations

Sandvik Coromant

880-0704W10H-P-LM INSERT GRADE 4344

7 Variations

Allied Machine and Engineering

4C21H-20.5 20.50mm AM200 COAT INSERT

23 Variations

Iscar

IDI 170-SG CHAMDRILL INSERT GRADE IC908

31 Variations

Sandvik Coromant

880-0403W05H-P-GM INSERT GRADE 4344

7 Variations

Sandvik Coromant

880-0503W05H-P-GM INSERT GRADE 4344

7 Variations

Sandvik Coromant

880-03 03 05H-C-LM, Drilling Insert, Carbide, Grade 1044

9 Variations

Allied Machine and Engineering

452H-26, Drill Insert, 26mm, Cobalt High Speed Steel, Grade AM200, GEN2 T-A, HSS, Super Cobalt

39 Variations

Allied Machine and Engineering

433T-47 47.00mm CPM-M4 HS S TIN INSERT

28 Variations

Allied Machine and Engineering

454H-50, Drill Insert, 50mm, Cobalt High Speed Steel, Grade CPM-T15

25 Variations

Sandvik Coromant

880-0604W10H-P-GR INSERT GRADE 4334

20 Variations

Sandvik Coromant

880-0403W07H-P-LM INSERT GRADE 4344

7 Variations

Sandvik Coromant

880-02 02 04H-C-LM, Drilling Insert, Carbide, Grade 1044

9 Variations

Sandvik Coromant

880-0202 W05H-P LM INSERTGRADE 4344

2 Variations

Sandvik Coromant

880-03 03 W06H-P-LM INSERT GRADE 4344

3 Variations

Sandvik Coromant

880-08 05W10H-P, Drilling Insert, Carbide, Grade 4334

13 Variations

Allied Machine and Engineering

1C2ZA-12, Drill Insert, 12mm, Carbide, Grade K20

Allied Machine and Engineering

150N-14, Drill Insert, 14mm, Cobalt High Speed Steel

14 Variations

Allied Machine and Engineering

4C20H-14.5 14.50mm AM200COAT INSERT

12 Variations

Allied Machine and Engineering

4C20H-17, Drill Insert, 17mm, Carbide, Grade K20

12 Variations

Allied Machine and Engineering

450H-17.5, Drill Insert, 17.5mm, Cobalt High Speed Steel, Grade AM200, GEN2 T-A, HSS, Super Cobalt