Multi-Tooth Annular Cutters

Power Tools

cutter_material

cutting_diametermm

depth_of_cut

shank_diameter

shank_type

type

brand

categoryId

stockStatus

newProduct

Consumables & Accessories

Rotabroach

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4” pilot bore and can be used in most magnetic drills. 700N/mm2 material hardness.
Standard Cutter Series
Depth of cut: 25mm.
Bore: 6mm.

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier and are more accurate than the conventional twist drills or drill bits. 
Compatible batteries - MLW2805460N, MLW2805560M, MLW2805545L.

Features and Benefits
• Cutters are made of super tough high-speed steel (M2 grade) with 3/4" Weldon shank compatible with all magnetic drills
• Accurate, symmetrical, fine finish hole cutting capabilities
• Reduced friction between the HSS core drill and the material
• Time and energy savings 

Typical Applications
• The ideal choice for all your magnetic drilling & cutting applications
• Designed for use in fabrication, construction, railways, petrochemical and any other applications when drilling ferrous metal, structural steel, plate, tubing or material that requires a fine finish hole 



HSS Type Annular Mag Drill Hole Raptor Broach Cutter Short

RAP140, Multi-Tooth Cutter, Short Series, 14mm x 25mm, 4 Teeth, M2 High Speed Steel

For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for ‘blind’ or ‘through’ pilot holes, pin will retract into cutter adaptor on ‘bottoming’.
Short Series = 12mm cutter. 
Long Series = 13 - 52mm cutters.
* For 12mm cutters only

For use with all multi-tooth milling cutters with 6mm bore. 

Features and Benefits
• Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter
• Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adaptor upon 'bottoming'

Notes
• Short Series = 12mm cutter
• For 12mm cutters only
• Long Series = 13 - 52mm cutters

Pilot Pins

Pilot Pin, 13-52mm x 25mm, Steel

RAP180, Multi-Tooth Cutter, Short Series, 18mm x 25mm, 6 Teeth, M2 High Speed Steel

Pilot Pin, 13-52mm x 50mm, Steel

RAP220, Multi-Tooth Cutter, Short Series, 22mm x 25mm, 6 Teeth, M2 High Speed Steel

RAP160, Multi-Tooth Cutter, Short Series, 16mm x 25mm, 4 Teeth, M2 High Speed Steel

RAP120, Multi-Tooth Cutter, Short Series, 12mm x 25mm, 4 Teeth, M2 High Speed Steel

Pilot Pin, 12mm x 25mm, Steel

Unibor

The Unibor® HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 30mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.

Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4inch Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor® geometry for optimum tool life and cutting speed

Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications

M2HSS Annular Cutters 30mm Depth

Multi-Tooth Cutter, Short Series, 50mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 14mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 40mm x 30mm, HSS M2

RAP200, Multi-Tooth Cutter, Short Series, 20mm x 25mm, 6 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Short Series, 12mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 16mm x 30mm, HSS M2

RAP130, Multi-Tooth Cutter, Short Series, 13mm x 25mm, 4 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Short Series, 30mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 35mm x 30mm, HSS M2

Kennedy

Bore diameter: 20mm. 
Overall length: 156mm.

For use with all multi-tooth cutters with 6mm bore. 

Features and Benefits
• Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter
• Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adaptor upon bottoming

Notes
• Short series = 77mm
• Long series = 102mm



These strong raptor M2 HSS cutters provide an accurate and simple way of cutting a wide range of materials compared with conventional twist drills or other drill bits. 

Features and Benefits 
• A precise, easier, and efficient way of cutting materials 
• Less time-consuming compared with conventional twists frills or drill bits 
• The friction is reduced between the HSS core drill and the material 

Applications 
• For use with all magnetic drilling and cutting applications 
• Designed to be used on a wide range of industries including construction, railways, fabrication, engineering, and mining 


Multi-Tooth Cutter 

RAPL180 18.00mm L/S CUTTER

RAP260, Multi-Tooth Cutter, Short Series, 26mm x 25mm, 8 Teeth, M2 High Speed Steel

For perfect holes in sheet metal, pipes and plastic. Cut clean, burr-free holes in seconds. Mini Cutters produce holes by removing a ‘disc’ of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Designed to give higher performance and longer cutting life on stainless steel and other difficult materials. Annular cutting action with no ‘dead centre’ area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. The highly efficient cutting action ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws made from M2 High Speed Steel.

Rotabroach Mini Cutters cut clean, burr-free holes in seconds. 

Features and Benefits:
■ Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time.

■ Precision ground M2 high Speed Steel

■ Over 3 times faster than standard twist drills making them highly economical.

■ Low power consumption giving a long life to cordless drills.

Typical Applications:
■ The professional solution for cutting clean accurate holes in sheet metal, pipes and plastics.



Hole Cutters - Mini

Mini Cutter, 20mm x 6.4mm, 6 Teeth, M2 High Speed Steel

Multi-Tooth Cutter, Short Series, 32mm x 30mm, HSS M2

The Unibor® HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 50mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.

Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4" Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor geometry for optimum tool life and cutting speed

Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications

M2HSS Annular Cutters 50mm Depth

Multi-Tooth Cutter, Long Series, 24mm x 50mm, HSS M2

Multi-Tooth Cutter, Short Series, 24mm x 30mm, HSS M2

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Multi-Tooth Annular Cutters

Rotabroach

RAP140, Multi-Tooth Cutter, Short Series, 14mm x 25mm, 4 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

Pilot Pin, 13-52mm x 25mm, Steel

3 Variations

Rotabroach

RAP180, Multi-Tooth Cutter, Short Series, 18mm x 25mm, 6 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

Pilot Pin, 13-52mm x 50mm, Steel

3 Variations

Rotabroach

RAP220, Multi-Tooth Cutter, Short Series, 22mm x 25mm, 6 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

RAP160, Multi-Tooth Cutter, Short Series, 16mm x 25mm, 4 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

RAP120, Multi-Tooth Cutter, Short Series, 12mm x 25mm, 4 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

Pilot Pin, 12mm x 25mm, Steel

3 Variations

Unibor

Multi-Tooth Cutter, Short Series, 50mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 14mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 40mm x 30mm, HSS M2

51 Variations

Rotabroach

RAP200, Multi-Tooth Cutter, Short Series, 20mm x 25mm, 6 Teeth, M2 High Speed Steel

17 Variations

Unibor

Multi-Tooth Cutter, Short Series, 12mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 16mm x 30mm, HSS M2

51 Variations

Rotabroach

RAP130, Multi-Tooth Cutter, Short Series, 13mm x 25mm, 4 Teeth, M2 High Speed Steel

17 Variations

Unibor

Multi-Tooth Cutter, Short Series, 30mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 35mm x 30mm, HSS M2

51 Variations

Kennedy

Pilot Pin, 13-52mm x 50mm, Steel

4 Variations

Kennedy

Pilot Pin, 13-52mm x 25mm, Steel

4 Variations

Rotabroach

RAPL180 18.00mm L/S CUTTER

27 Variations

Rotabroach

RAP260, Multi-Tooth Cutter, Short Series, 26mm x 25mm, 8 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

Mini Cutter, 20mm x 6.4mm, 6 Teeth, M2 High Speed Steel

20 Variations

Unibor

Multi-Tooth Cutter, Short Series, 32mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 24mm x 50mm, HSS M2

51 Variations

Unibor