Grooving Inserts

Cutting Tools

cutting_application

cutting_direction

depth_of_cutmm

manufacturer_grade

material

series

brand

categoryId

stockStatus

Parting & Grooving

Inserts & Blades

Kennametal

A2™ cut off inserts for general purpose machining of most steels, stainless steels, high-temperature alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium, and will handle interruptions and high feed rates.

Features and Benefits
• Higher productivity & profitability - up to 30% higher
• Higher metal removal rate (speed, feed, and depth-of-cut) with longer tool life
• Versatile can be applied across a wide range of applications
• Suitable for use in low to high-speed applications
• Uniform wear for predictable tool life
• Achieve reduced depth-of-cut notching
• Virtually eliminates chip flow damage

Standards
• Grade: KC5025
• ISO range: P20-30 M20-30 K20-30 N20-30 S20-30
• ANSI range: C6 C2

Typical Applications
• Steel
• Cast iron
• Stainless steel 
• ISO turning workpieces


A2™  Cut Off Inserts Grade KC5025

A2030N00CF02 ,A2™,  Grooving Insert, Grade KC5025

Iscar

First choice for soft materials, parting of tubes, small diameters and thin walled parts. Cutting edge with positive rake. General application on low carbon steel, alloy steel, austenitic stainless steel.

TiALN PVD coated grade giving very high toughness for interrupted cutting. Excellent notch wear and built-up edge resistance. Low to medium speed. Suitable for use on carbon, alloy and stainless steels.

Iscar DO-GRIP Parting & Grooving Inserts - IC908 (P15-P30, M20-M30, K20-K30)

Do-Grip, Grooving Insert, DGN 2202J, Grade IC908

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Grade: IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

Grade: IC907
A tough sub-micron substrate, TiAlN PVD coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel.
ISO Range - P/M/K: (P10-P30)(M05-M20)(K15-K30)
ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N20)
Grade or Coating Type: PVD
Coating Layers: TiAlN+TiN

Grade: IC308
A tough sub-micron PVD coated grade. Suitable forlow to medium cutting speed. Designed for machining of heat resistant alloys, austenitic stainless steel, hard materials and carbon steel at interrupted cut and unfavorable conditions.
ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30)
ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade: IC328
A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.
ISO Range - P/M/K: (P25-P40)(M30-M40)
ISO Range - H/S/N: (S20-S30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade: IC808
A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.
ISO Range - P/M/K: (P15-P30)(M20-M30)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN/AlTiN+TiN 

Iscar DO-GRIP Parting & Grooving Inserts

Do-Grip, Grooving Insert, DGNC 3102C, Grade IC808

Sandvik Coromant

N123J1 CoroCutⓇ 1-2 Profiling Inserts 

Insert Grade 7015

N123J1 CoroCutⓇ 1-2 Profiling Inserts Grade 7015

N123J1-0600S01025 INSERT GRADE 7015

First choice for the parting of bars, hard materials and tough applications. A positive rake single cavity with negative hand and shoulders, provides extra cutting-edge strength. Medium to low feeds.

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Features and Benefits
• A thin PVD coated TiCN layer on a P40 substrate
• High toughness and durability
• For general applications in parting and grooving steel at medium to high speeds

Specifications
• Grade: IC354
• ISO Range - P/M/K: (P20-P40)(M10-M30)
• Grade or Coating Type: PVD
• Coating Layers: TiCN

Typical Applications
• Parting
• Grooving
• Steel 
• Steel alloys
• Stainless streel


Iscar DO-GRIP Parting & Grooving Inserts Grade IC354

Do-Grip, Grooving Insert, DGN 2002C, Grade IC354

GRIP (full radius) : Full radius, double-ended inserts, for turning and grooving in external, internal and face applications. 
For External, Internal & Face Machining

Grade: IC08
An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed.
ISO Range - P/M/K: (M20-M30)
ISO Range - H/S/N: (S10-S30)(N10-N20)
Grade or Coating Type: UN-COATED
Coating Layers: Uncoated

Grade: IC808
A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.
ISO Range - P/M/K: (P15-P30)(M20-M30)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN/AlTiN+TiN

Grade: IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)  
Grade or Coating Type: PVD  
Coating Layers: TiCN

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

Grade: IC9025	
A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance.
ISO Range - P/M/K: (P20-P30)(M15-M30)
Grade or Coating Type: CVD
Coating Layers: TiCN+Al2O3+TiN
Grade: IC418
CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining.
ISO Range - P/M/K: (K10-K25)
Grade or Coating Type: CVD
Coating Layers: TiC+Al2O3

Grade: IC830
A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance.
ISO Range - P/M/K: (P20-P40)(M25-M35)
ISO Range - H/S/N: (S15-S30)
Grade or Coating Type: PVD
Coating Layers: AlTiN+TiN

Grade: IC418
CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining.
ISO Range - P/M/K: (K10-K25)
Grade or Coating Type: CVD
Coating Layers: TiC+Al2O3

GRIP_Y (Full Radius) Inserts

GRIP 4020Y INSERT GRADE I C808

This special key is required for insertion and removal of all Iscar Tang-Grip? parting & grooving inserts

Single-Ended Insert for Parting With an Improved Clamping Method

Tang-Grip Tangentially Clamped, Single-Ended Parting System

PENTA 17-NP-RS/LS PENTACUT Groove-Turn & Parting Inserts 

Precision grooving and turning pentagonal inserts, used on Swiss type automatics and small CNC lathes. 

• For the miniature parts industry
• Precision insert featuring high indexing repeatability precision for 5 cutting edges
• Edge indexing enabled from both tool sides
• Short head design - most suitable for small machine tools
• Very rigid and accurate clamping

Insert Grade IC1008 
(P20-P50)(M20-M40)(K15-K40)(H20-H30)(S15-S25)(N05-N25)
PVD 	TiAlN+TiN  Coated insert for use on High temperature alloys,Stainless steel and Hardened steel 


PENTA 17-NP-RS/LS Precision Grooving And Turning Pentagonal Inserts Grade IC1008

PENTA 17-200NP08RS Precision Grooving And Turning Insert Grade  IC1008

DGN 3102C INSERT GRADE IC808

Horn

This range of inserts are suitable for grooving, boring, face grooving and threading. The same toolholder can be used for all type 105 inserts. The specially designed backend guarantees accurate centre height and indexability.

Features and Benefits
• Versatile insert, suitable for use with all type 105 inserts
• Enlarged backend ensures a rigid clamping and good vibration resistance
• Backend also guarantees accurate centre height

Typical Applications
• Grooving
• Boring
• Face grooving
• Threading

R105 Grooving Inserts

R105.1823.4.5 INSERT GRADE TN35

PENTA 17-100NP08LS Precision Grooving And Turning Insert Grade  IC1008

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Features and Benefits
• A hard, fine grain substrate with excellent chipping resistance
• New TiAlN PVD coating for added durability
• Provides high wear and oxidation resistance
• Recommended for a wide range of materials applications and machining conditions

Specifications
• Grade: IC908
• ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
• ISO Range - H/S/N: (H10-H20)(S10-S25)
• Grade or Coating Type: PVD
• Coating Layers: TiAlN

Typical Applications
• Parting
• Grooving

Do-Grip, Grooving Insert, DGN 2002Z, Grade IC908

Do-Grip, Grooving Insert, DGN 3102C, Grade IC354

ISCAR has developed a new insert designated PENTACUT, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique J-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.

For all dimensional and technical specifications please refer to our catalogue.

Penta 24N - Precision Grooving, Part & Recessing

PENTA 24N120J000 INSERT GRADE IC908

PENTA 24N200J020 INSERT GRADE IC908

PENTA 24N270J010 INSERT GRADE IC908

N123G1 CoroCutⓇ 1-2 Grooving Inserts 

Insert Grade 7015

N123G1 CoroCutⓇ 1-2 Grooving Inserts Grade 7015

N123G1-030004S01025 INSERT GRADE 7015

114 Grooving Inserts

R114.0200.02 INSERT GRADE TN35

PENTA 17-300NP08RS Precision Grooving And Turning Insert Grade  IC1008

Do-Grip, Grooving Insert, DGL 3102J-6D, Grade IC908

DGN 1002J INSERT GRADE IC908

PVD coated roughing grade, interrupted cutting and high resistance to mechanical and thermal shock. Suitable for low speed, high feed applications involving carbon, alloy and stainless steels.

Features and Benefits
• High resistance to mechanical and thermal shock
• PVD TiCN coating for greater durability
• Ideal for low speed and high feed applications

Typical Applications
• Roughing 
• Carbon steel
• Alloy steel
• Stainless steel

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Grooving Inserts

Kennametal

A2030N00CF02 ,A2™, Grooving Insert, Grade KC5025

17 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202J, Grade IC908

20 Variations

Iscar

Do-Grip, Grooving Insert, DGNC 3102C, Grade IC808

9 Variations

Sandvik Coromant

N123J1-0600S01025 INSERT GRADE 7015

4 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2002C, Grade IC354

6 Variations

Iscar

GRIP 4020Y INSERT GRADE I C808

13 Variations

Iscar

Tang-Grip Tangentially Clamped, Single-Ended Parting System

Iscar

PENTA 17-200NP08RS Precision Grooving And Turning Insert Grade IC1008

6 Variations

Iscar

DGN 3102C INSERT GRADE IC808

Horn

R105.1823.4.5 INSERT GRADE TN35

4 Variations

Iscar

PENTA 17-100NP08LS Precision Grooving And Turning Insert Grade IC1008

6 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2002Z, Grade IC908

10 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3102C, Grade IC354

6 Variations

Iscar

PENTA 24N120J000 INSERT GRADE IC908

26 Variations

Iscar

PENTA 24N200J020 INSERT GRADE IC908

26 Variations

Iscar

PENTA 24N270J010 INSERT GRADE IC908

26 Variations

Sandvik Coromant

N123G1-030004S01025 INSERT GRADE 7015

Horn

R114.0200.02 INSERT GRADE TN35

Iscar

PENTA 17-300NP08RS Precision Grooving And Turning Insert Grade IC1008

6 Variations

Iscar

Do-Grip, Grooving Insert, DGL 3102J-6D, Grade IC908

20 Variations

Iscar

DGN 1002J INSERT GRADE IC908

20 Variations

Iscar

Do-Grip, Grooving Insert, DGN 1402J, Grade IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGN 1502J, Grade IC328

36 Variations

Iscar

DGN 2202C INSERT GRADE IC 354

6 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202J, Grade IC328

36 Variations

Key Information

Policies