Bushes

Bearings & Transmissions

bore_diametermm

large_diametermm

product_type

taper_bush_number

brand

categoryId

stockStatus

Pulleys & Sprockets

Dunlop BTL

Used to fit pulleys and chain sprockets onto a shaft and retained using 
keysteel. Taper bore bushes are easy to assemble and are an ideal method of connecting to a shaft without expensive machining. 
Other Sizes are available - please ask for details

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws.

Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. 

Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

Taper Bushes - Metric

1210-30 METRIC TAPER BUSH

1610-28 METRIC TAPER BUSH

1108-24 METRIC TAPER BUSH

1210-19 METRIC TAPER BUSH

1610-25 METRIC TAPER BUSH

1610-35 METRIC TAPER BUSH

1610-38 METRIC TAPER BUSH

2012-30 METRIC TAPER BUSH

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws.

Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. 

Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 1/2mm) for example 1610/1/2

Taper Bush - Inch

1108-1 IMPERIAL TAPER BUSH

Optibelt

Keyways to DIN 6885 Part 1.		
* Bores marked have shallow keyways.

Used to fit flywheels, pulleys and chain sprockets onto a shaft. Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining. To lock the shaft tighten up two grub screws, to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft. 
Material: EN-GJL 200/DIN EN 1561.

Metric Sizes		
Keyways to DIN 6885 Part 1.		
* Bores marked have shallow keyways.

We supply taper bushes up to sizes 8065 with bore sizes up to 200mm/8”. Pilot bore taper bushes are also available. For further information please contact your local branch.

Taper Bore Bushes - Metric Sizes

3020-35 METRIC TAPER BORE BUSH

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Bushes

Dunlop BTL

1210-30 METRIC TAPER BUSH

195 Variations

Dunlop BTL

1610-28 METRIC TAPER BUSH

195 Variations

Dunlop BTL

1108-24 METRIC TAPER BUSH

195 Variations

Dunlop BTL

1210-19 METRIC TAPER BUSH

195 Variations

Dunlop BTL

1610-25 METRIC TAPER BUSH

195 Variations

Dunlop BTL

1610-35 METRIC TAPER BUSH

195 Variations

Dunlop BTL

1610-38 METRIC TAPER BUSH

195 Variations

Dunlop BTL

2012-30 METRIC TAPER BUSH

195 Variations

Dunlop BTL

1108-1 IMPERIAL TAPER BUSH

125 Variations

Optibelt

3020-35 METRIC TAPER BORE BUSH

12 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.