Drive Belts

Timing Belts

V Belts

Wedge Belts

Belt Tensioners

Bearings & Transmissions

belt_section

belt_type

belt_widthmm

brand

categoryId

stockStatus

Dunlop BTL

Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. Dunlop V-belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.
A Section

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has anti-static properties with good power transmission capabilities. It is suitable for both industrial machinery and agricultural equipment.

Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. 

MECHANICAL FEATURES:

• Smooth starting and running.
• Wide range of drive speeds, using standard electric motors.
• Low maintenance.
• Highly efficient.
• No need for lubrication.
• Extremely wide horsepower ranges.
• Dampen vibration between driver and driven pulleys.
• Silent operations.
• Long Service Life.
• Easy Installation.
• Reduction in drive dimension.

CHEMICAL FEATURES:

• Working temperature range -30 ̊C to +80 ̊C.
• Resistance to oil and heat.
• Anti-static properties to ISO 1813.

IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.





Standard Drive V-belt Wrapped - Section A (13mm x 8mm)

A30 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 762mm

A33 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 838mm

Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. Dunlop V-belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.
B Section

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has antistatic properties with good power transmission capabilities.
 
Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. 

It is suitable for both industrial machinery and agricultural equipment.

MECHANICAL FEATURES:

• Smooth starting and running.
• Wide range of drive speeds, using standard electric motors.
• Low maintenance.
• Highly efficient.
• No need for lubrication.
• Extremely wide horsepower ranges.
• Dampen vibration between driver and driven pulleys.
• Silent operations.
• Long Service Life.
• Easy Installation.
• Reduction in drive dimension.

CHEMICAL FEATURES:

• Working temperature range -30 ̊C to +80 ̊C.
• Resistance to oil and heat.

• Anti-static properties to ISO 1813.

IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION






Standard Drive V-Belts Wrapped - Section Z (10 x 6mm)

Z22 Standard Drive V-Belts Wrapped - Section Z (10 x 6mm) Inside Length 559mm

A39 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 991mm

A26 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 660mm

A25 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 635mm

A27 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 686mm

A29 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 737mm

Double Angle V-Belts are used to transmit the power from both sides of the v-belts. 
For serpentine type drives, double angle v-belts flex equally well in both directions.

AA Section 
BB Section
CC Section

Double Angle V-Belts are used to transmit the power from both sides of the V-belts. 
For serpentine type drives, double angle V-belts flex equally well in both directions.

AA Section 13 x 10mm
BB Section 17 x 13mm
CC Section 22 x 17mm

Hexagonal V-Belts 

AA86 HEXAGONAL BELT - STANDARD

A30-1/2 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 775mm

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Drive Belts

Key Information

Policies

© 2023 Cromwell. All rights reserved.