Throwaway Cutters

Cutting Tools

cutter_diameter

cutting_direction

flute_length

material

number_of_flutes

overall_lengthmm

shank_diameter

system_of_measurement

brand

categoryId

stockStatus

Milling

KC3 Milling Cutters

Kennedy

For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

Short series

Short Series - Metric
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. 

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. 
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.	
Shank Diameter:  1.00 ~ 6.00 = 6.00mm, 7.00 ~ 10.00 = 10.00mm

Metric Tolerances: 
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Metric - Uncoated

Throwaway Cutter, Short, 2mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Short, 8mm, Cobalt High Speed Steel, Uncoated, M35

Long Series
Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. 

Long Series - Metric.
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. 

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. 
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.

Metric Tolerances: 
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Metric - Uncoated

Throwaway Cutter, Long, 1.5mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Long, 4mm, Cobalt High Speed Steel, Uncoated, M35

Short Series - Inch
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. 
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4”,

Inch Tolerances: 
Diameter: Over 1/16” ~ up to 1/4”. Tolerance: +0.0005, -0.0013.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

Short Series - Inch.
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. 

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. 
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.

Inch Tolerances: 
Diameter: Over 1/16" ~ up to 1/4". Tolerance: +0.0005, -0.0013.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch - Uncoated

Throwaway Cutter, Short, 3/16in., Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Long, 2mm, Cobalt High Speed Steel, Uncoated, M35

Long Series - Metric - TiN Coated
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. 

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4".
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.

Metric Tolerances: 
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Metric - TiN Coated

Throwaway Cutter, Long, 1.5mm, 2 fl, Cobalt High Speed Steel, TiN

Throwaway Cutter, Short, 1/8in., Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Long, 2.5mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Long, 3.5mm, Cobalt High Speed Steel, Uncoated, M35

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Throwaway Cutters

Kennedy

Throwaway Cutter, Short, 2mm, Cobalt High Speed Steel, Uncoated, M35

10 Variations

Kennedy

Throwaway Cutter, Short, 8mm, Cobalt High Speed Steel, Uncoated, M35

10 Variations

Kennedy

Throwaway Cutter, Long, 1.5mm, Cobalt High Speed Steel, Uncoated, M35

12 Variations

Kennedy

Throwaway Cutter, Long, 4mm, Cobalt High Speed Steel, Uncoated, M35

12 Variations

Kennedy

Throwaway Cutter, Short, 3/16in., Cobalt High Speed Steel, Uncoated, M35

6 Variations

Kennedy

Throwaway Cutter, Long, 2mm, Cobalt High Speed Steel, Uncoated, M35

12 Variations

Kennedy

Throwaway Cutter, Long, 1.5mm, 2 fl, Cobalt High Speed Steel, TiN

10 Variations

Kennedy

Throwaway Cutter, Short, 1/8in., Cobalt High Speed Steel, Uncoated, M35

6 Variations

Kennedy

Throwaway Cutter, Long, 2.5mm, Cobalt High Speed Steel, Uncoated, M35

12 Variations

Kennedy

Throwaway Cutter, Long, 3.5mm, Cobalt High Speed Steel, Uncoated, M35

12 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.