Relays

Electrical & Lighting

contact_configuration

current_ratinga

for_use_with

ingress_protection_rating_ip_rating

material

maximum_load_voltage

model_series

monitoring_control

mounting_type

number_of_functions

number_of_pins

number_of_poles

phase_sensitivity

rated_output

socket_type

standards_met

supply_voltage

switch_configuration

switching_type

terminal_type

time_delays

voltage_range

brand

categoryId

stockStatus

Automation & Controls

General Purpose Relays

Schneider Electric

RXM 4-pole 6A miniature relays with lockable test button and LED. 

Features and Benefits:
-Spring return push button for testing the contacts (green for DC voltage, red for AC)
-Mechanical relay status indicator
-Removable legend for relay identification and built-in marking area

Notes:
-18 months manufacturer's warranty

Miniature Relays, With LED

Miniature Relay, With LED, RXM4AB2BD 24V dc

Miniature Relay, With LED, RXM4AB2E7 48V ac

Miniature Relay, With LED, RXM4AB2ED 48V dc

Miniature Relay, With LED, RXM4AB2FD 110V dc

Miniature Relay, With LED, RXM4AB2JD 12V dc

Miniature Relay, With LED, RXM4AB2P7 230V ac

RXM 4-pole 3A miniature low level contacts relay with lockable test button and LED. Spring return push button for testing the contacts (green for DC voltage, red for AC). Mechanical relay status indicator. Removable legend for relay identification. Built-in marking area.

Miniature Relays RXM4GB2

Miniature Relay RXM4GB2BD 24V dc

Relay Accessories

Clamps for Zelio Relay sockets. Packet of 10.

Zelio Metal Maintaining Clamps

Zelio RXZ400 Metal Maintaining Clamp 22x42mm (PK-10)

Relay Sockets

Screw panel fixing with clip-on 35 mm symmetrical DIN rail and flat pins. 

Typical Applications:
-For use with plug-in relays RXM (2 C/O) and RXM (4 C/O)

Notes:
-IP20 degree of  protection, conforming to EN/IEC 60529
-IEC 61984 Standard

Relay Socket, For RXM2.., RXM4..

Relay Socket, For RXM4.., REXL4..

Relay Socket for use with RXM Series Relays.
Screw Socket type, Din Rail mounted. Flat Pins. 
IP20 degree of protection. IEC 61984 Standard.

Zelio Relay Sockets RXZE2S

RXZE2S108M 2CO Relay Socket for RXM2 Relays

RXZE2S114M 4CO Relay Socket for RXM4 Relays

Clamps for Zelio Relay sockets. Packet of 25.

Zelio Plastic Maintaining Clamps

Zelio RXZR335 Plastic Maintaining Clamp 27x57mm (PK-25)

Protection module diode with green LED for RSZ sockets. Packet of 10.

Zelio Electromechanical Relays

Zelio RZM031BN Module Diode with Green LED 24-60V dc

Zelio RZM031RB Module Diode with Green LED 6-24V dc

Safety Relays

For emergency stop and switch monitoring. 24V ac/dc. Safety modules XPSAXE are used for monitoring Emergency Stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. They meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard EN/ISO 14119. They provide protection for both the machine operator and the machine by immediately stopping the dangerous movement on receipt of a stop instruction from the operator, or on detection of an anomaly in the safety circuit itself.
These XPSAXE modules incorporate 3 N/O safety outputs and a relay output for signalling to the PLC and have 2 LEDs to provide information on the monitoring circuit status.

Category 0 XPSAXE

Preventa Cat. 0 Safety Relay XPSAXE----P 24V ac/dc

For zero speed detection. 24V dc. The XPSVNE most common applications include providing the unlock signal for electrically interlocked sliding or removable machine guards, controlling rotation direction signals for reversing motors and engaging locking brakes after a motor has come to a standstill. The cabling between the motor windings and the inputs of the XPSVNE module is also monitored to prevent a cabling breakage or anomaly being seen as a stopped motor. The input filters for standard XPSVNE modules are designed for a frequency of up to 60 Hz.
For motors operating at a frequency higher than 60 Hz, which therefore produce a high frequency remanent voltage, special modules XPSVNE----HS should be used. The XPSVN is not compatible with Wound Rotor Motors and is not designed to detect locked rotor conditions. 
The XPSVNE modules incorporate 2 solid-state outputs for PLC signalling and 4 LEDs to provide information on the monitoring circuit status. These modules also have two potentiometers mounted on the front cover to allow independent adjustment of the switching threshold for each input circuit.

Category 3 XPSVNE - Zero Speed Detection

Preventa Cat. 3 Safety Relay XPSVNE----P 24V dc

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Relays

Schneider Electric

Miniature Relay, With LED, RXM4AB2BD 24V dc

8 Variations

Schneider Electric

Miniature Relay, With LED, RXM4AB2E7 48V ac

8 Variations

Schneider Electric

Miniature Relay, With LED, RXM4AB2ED 48V dc

8 Variations

Schneider Electric

Miniature Relay, With LED, RXM4AB2FD 110V dc

8 Variations

Schneider Electric

Miniature Relay, With LED, RXM4AB2JD 12V dc

8 Variations

Schneider Electric

Miniature Relay, With LED, RXM4AB2P7 230V ac

8 Variations

Schneider Electric

Miniature Relay RXM4GB2BD 24V dc

Schneider Electric

Zelio RXZ400 Metal Maintaining Clamp 22x42mm (PK-10)

2 Variations

Schneider Electric

Relay Socket, For RXM2.., RXM4..

2 Variations

Schneider Electric

Relay Socket, For RXM4.., REXL4..

2 Variations

Schneider Electric

RXZE2S108M 2CO Relay Socket for RXM2 Relays

2 Variations

Schneider Electric

RXZE2S114M 4CO Relay Socket for RXM4 Relays

2 Variations

Schneider Electric

Zelio RXZR335 Plastic Maintaining Clamp 27x57mm (PK-25)

Schneider Electric

Zelio RZM031BN Module Diode with Green LED 24-60V dc

2 Variations

Schneider Electric

Zelio RZM031RB Module Diode with Green LED 6-24V dc

2 Variations

Schneider Electric

Preventa Cat. 0 Safety Relay XPSAXE----P 24V ac/dc

Schneider Electric

Preventa Cat. 3 Safety Relay XPSVNE----P 24V dc

Key Information

Policies

© 2024 Cromwell. All rights reserved.