Inserts & Blades

Explore our wide selection of high-quality inserts and blades for cutting tools at Cromwell UK. Find the right inserts and blades for your cutting needs.

Inserts and Blades | Cutting Tools | Cromwell UK

Cutting Tools

blade_heightmm

blade_lengthmm

blade_style

blade_type

coolant_delivery

cutting_application

cutting_direction

cutting_location

depth_of_cutmm

grooving_widthmm

insert_style

iso_category_grade

manufacturer_grade

material

maximum_grooving_widthmm

minimum_grooving_widthmm

number_of_pockets

radius_type

series

widthmm

brand

categoryId

stockStatus

rangeable_corner_radiusmm

newProduct

Parting & Grooving

Parting Inserts

Iscar

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

TAG N-J/JS/JT 
Parting and grooving inserts
Single-ended insert For Parting - With a vastly improved clamping method.

Features and Benefits 
• Incredibly rigid clamping in a tangentially oriented pocket
• Allows machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts - great for interrupted cuts
• Offers a free, unobstructed chip flow - since there is no upper jaw like in other clamping systems (very important in deep grooving and parting applications)
• The combination of tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG N-J/JS/JT Parting & Grooving Inserts Grade IC808

TAG N3J INSERT GRADE IC80 8

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

TAG N-J/JS/JT : First choice for soft materials, alloy steel and austenitic stainless steel. Parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake used at low-to-medium feeds. The JS-type has sharp corners. 70% more productivity, tangentially clamped, single-ended parting system
ISCAR's new, single-ended insert for parting with an improved clamping method.

Features and Benefits
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow, since there is no upper jaw
• The combination of tangential clamping and free chip flow results in improved tool and insert lifetime
• Provides a solution to the problem of inserts being pulled out during retraction

Specifications
• Grade: IC830
• A 'SUMO TEC' AlTiN+TiN PVD coated grade
• ISO Range - P/M/K: (P20-P40)(M25-M35)
• ISO Range - H/S/N: (S15-S30)
• Grade or Coating Type: PVD
• Coating Layers: AlTiN+TiN

Typical Applications
• Parting
• Stainless steels
• Steel

TAG N-J /JS/JT Parting And Grooving Inserts Grade IC830

TAG N3J INSERT GRADE IC83 0

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

Parting and Grooving Single-Ended Inserts for Parting Bars, Hard Materials and 
Tough Applications. The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Features and Benefits
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates providing excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow
• Tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

Standards
• Grade: IC808 

Typical Applications
• Parting
• Grooving

Notes
(1) Larger corner radii for interrupted cut and high feed applications
(2) Tolerance for W<6 mm = ±0.05. For W>6 mm = ±0.10

TAG N-C/W Parting & Grooving Inserts Grade IC808

TAG N3C INSERT GRADE IC808

Sandvik Coromant

R151.2 T-MaxⓇ Q-Cut Parting Inserts 

Insert Grade 1125

R151.2 T-MaxⓇ Q-Cut Parting Inserts Grade 1125

R151.2-200-08-5F INSERT GRADE 1125

R151.2-300-05-5E INSERT GRADE 1125

Parting Blades

ISCAR Tang-Grip? has the following features:

? Enables machining at high feed rates and provides excellent straightness and surface finish.
? Provides a solution to the problem of inserts being pulled out during retraction. Has a solid stopper, unlike the friction retaining force in the current systems. (Especially important on machines with a bar feeder or sub spindles.)
? In the SELF-GRIP? system the machining forces are exerted on a very short stopper, while in the TANG-GRIP system, machining forces are supported by a long and rigid rear wall. Pocket wear, which occurs during machining and insert indexing in the SELF-GRIP? system, causes a reduction in the clamping force. This does not happen with the new TANG-GRIP? system.
? The TANG-GRIP? system provides very accurate grooving repeatability.
? The combination of tangential clamping and free chip flow results in improved tool and pocket life. 
? Offers a free, unobstructed chip flow. This is very important in deep grooving, since there is no upper jaw to interfere as in the other clamping systems.
 
For all technical specifications and inserts please refer to our catalogue.

Iscar blades stand out as specialized tools meticulously crafted for compatibility with TANG-GRIP single-ended inserts. Engineered with a focus on robust clamping, these blades empower machining processes at exceptionally high speeds, guaranteeing superior straightness and a polished surface finish. The intricately designed and precisely manufactured blades establish themselves as a dependable option for applications demanding high-speed machining. Their consistent performance and commitment to delivering quality results make Iscar blades a reliable and preferred choice for professionals seeking efficiency and precision in their machining endeavors.

Features and Benefits
• Very long product lifespan
• Extremely rigid clamp
• High feed rate machining
• Consistent results

Typical Applications
• Parting
• Grooving
• Ideal for large diameter and interrupted cuts

TGFH/R/L Blades

TGFH 26-3 - TANG-GRIP - TGFH/R/L Blade

Grooving Inserts

Kennametal

A2™ cut off inserts for general purpose machining of most steels, stainless steels, high-temperature alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium, and will handle interruptions and high feed rates.

Features and Benefits
• Higher productivity & profitability - up to 30% higher
• Higher metal removal rate (speed, feed, and depth-of-cut) with longer tool life
• Versatile can be applied across a wide range of applications
• Suitable for use in low to high-speed applications
• Uniform wear for predictable tool life
• Achieve reduced depth-of-cut notching
• Virtually eliminates chip flow damage

Standards
• Grade: KC5025
• ISO range: P20-30 M20-30 K20-30 N20-30 S20-30
• ANSI range: C6 C2

Typical Applications
• Steel
• Cast iron
• Stainless steel 
• ISO turning workpieces


A2™  Cut Off Inserts Grade KC5025

A2030N00CF02 ,A2™,  Grooving Insert, Grade KC5025

GFN SELF-GRIP parting and grooving inserts are self locking making them ideal for parting and grooving applications. Featuring a positive rake, single cavity and negative land and shoulders they provide extra cutting strength in medium to high feeds. Their PVD coating helps reduce their susceptibility to wear and heat. 

Features and Benefits
• Self locking for greater stability
• Positive rake and single cavity for greater chip flow
• Negative land and shoulders for greater strength
• PVD coating helps reduce wear and heat

Standards
• IC354 (P20 - P40, M10 - M30)
• PVD coated 
• Medium speed - high feed

Typical Applications
• Parting
• Grooving 
• Carbon steel
• Alloy steel
• Stainless steels

GFN SELF-GRIP Parting And Grooving Inserts Grade IC354

GFN-3 INSERT GRADE IC354

TGFH 32-3 - TANG-GRIP - TGFH/R/L Blade

N151. 2 T-MaxⓇ Q-Cut parting inserts feature a sturdy construction with a PVD TiAlN  coating for increased heat and wear resistance

Features and Benefits
• Grade 1125 construction for finishing applications
• PVD TiAlN  coating for heat and wear resistance
• 4G chipbreaker for effective chip control


N151. 2  T-MaxⓇ Q-Cut Parting Insert Grade 1125

N151.2-300-4E INSERT GRADE 1125

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Inserts & Blades

Iscar

TAG N3J INSERT GRADE IC80 8

12 Variations

Iscar

TAG N3J INSERT GRADE IC83 0

12 Variations

Iscar

TAG N3C INSERT GRADE IC808

10 Variations

Sandvik Coromant

R151.2-200-08-5F INSERT GRADE 1125

11 Variations

Sandvik Coromant

R151.2-300-05-5E INSERT GRADE 1125

11 Variations

Iscar

TGFH 26-3 - TANG-GRIP - TGFH/R/L Blade

30 Variations

Kennametal

A2030N00CF02 ,A2™, Grooving Insert, Grade KC5025

17 Variations

Iscar

GFN-3 INSERT GRADE IC354

25 Variations

Iscar

TGFH 32-3 - TANG-GRIP - TGFH/R/L Blade

30 Variations

Sandvik Coromant

N151.2-300-4E INSERT GRADE 1125

33 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.