Flawfinders

Lubricants & Chemicals

container_type

product_type

size

brand

categoryId

stockStatus

Detection Fluids

Solent Maintenance

White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked.

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. 

Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant.  SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Features and Benefits
• Detects flaws during manufacture or on site
• 3 part system, cleaner, dye penetrant and developing fluid
• Developing fluid reacts with highly sensitive red dye to display flaws in the weld
• Can be used to inspect welds, alloys or standard metals
• Supplied in a 500ml ozone-friendly aerosol

Typical Applications
• Welding 
• Metalwork


Flaw Detector Dye Penetrant Spray, 500ml

SF3-500B, Flawfinder Developer, Aerosol, 500ml

Ambersil

Quick drying solvent cleaner/degreaser and excess penetrant remover for the non-destructive testing of metal surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer. Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid penetrant inspection and to remove all visible, colored traces of the penetrant.

Once applied and left for at least 7 minutes, the developer enhances and makes each trace of penetrant visible.

Features and Benefits
• High contrast and easy to use 
• Can identify defects as small as 20μm
• Easy to remove via 'cleaner'

Typical Applications
• Detects cracks, lack of fusion, and open cavities in welded parts
• Finds cracks and cavities caused by metal fatigue and cutting operations
• Check for porosity or leaks in pipes, tanks, boilers, heat exchanges
• Discontinuities, laps, folds and cracks in castings, forgings and ceramics

Flaw Detector Developer, No.3, 400ml

No.3, Flawfinder Developer, Aerosol, 400ml

Ambersil Freezer Spray is a versatile rapid cooling agent designed for fault finding in electronic components, cooling thermally sensitive parts during soldering or calibration, and instant fault detection on printed circuit boards, transistors, resistors, and condensers. By spraying directly onto the suspect component, users can confirm defects, facilitating efficient replacements. This spray is also useful for shrink fitting metal assemblies and aiding the removal of hard, sticky substances like chewing gum. Ambersil Freezer Spray is a valuable tool for electronics maintenance, repair, and various industrial applications.

Features and Benefits
• Rapidly reduces component temperature by up to -50°C
• Non-flammable
• Non-toxic
• Completely odourless
• Can be used to cool thermally sensitive parts during soldering or calibration
• Size: 400ml

Typical Applications
• Electronic equipment
• Printed circuit boards
• Transistors
• Resistors
• Condensers
• Intermittent dry joint connectors

Approvals
• Rail Approved product (007/020505)

Flaw Detection Freezer Spray

Freezer/2, Freezer Spray, Aerosol, 400ml

Flaw Detector Cleaner No.1 from Ambersil is fast drying cleaner for the removal of all kinds of contaminants on the surface to be inspected. It also serves purpose as a surface preparation spray for inspection. 

Features and Benefits
• For as a preparation of the surface before inspection with dye penetrant
• Drys rapidly, leaving surfaces clean
• Removes surface contamination including, metal working fluid, anti-corrosion coatings, oil & grime

Typical Applications
• Welding
• Cracks and cavities
• Porosity checks

Warning
• Flammable - Aerosol, contains solvents

Flaw Detector Cleaner No.1, Aerosol 400ml

No.1, Flawfinder Cleaner, Aerosol, 400ml

Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions.

SF2-500B, Flawfinder Penetrant, Aerosol, 500ml

Red coloured, water washable penetrant for non-destructive testing of metal surfaces. The penetrant wicks into tiny flaws within 10 minutes and excess penetrant should be removed before using the developer.

Features and Benefits
• Discontinuities, laps, folds and cracks in castings, forgings and ceramics
• Detects cracks, lack of fusion, and open cavities in welded parts
• Highly visible red dye that is very easy to use and cost effective
• Wicks in to defects down to 20μm
• Finds cracks and cavities caused by metal fatigue and cutting operations
• Check for porosity or leaks in pipes, tanks, boilers, heat exchangers

Typical Applications
• Fault detection
• Metalwork
• Piping
• Ceramics


Flaw Detector Penetrant, No.2, 400ml

No.2, Flawfinder Penetrant, Aerosol, 400ml

Quick drying, powerful solvent for cleaning surfaces prior to testing. Removes contaminants including oils, greases and grime.

SF1-500, Flawfinder Cleaner, Aerosol, 500ml

Johnson & Allen

JAD-2 is a fast drying non-aqueous wet penetrant developer which creates a white opaque background for high-contrast penetrant testing.

Features and Benefits
• Acts quickly to draw out penetrant to create clearer and stronger indications for better inspection 
• Aerosol application for easy and quick uniform coverage
• Fast drying for promoting faster indication

Typical Applications
• Nuclear
• Military
• ASME
• Metallics
• Ceramics

Warnings
• Do not expose to flame: Extremely flammable 

Approvals
• Meets Certified Sulphur and Halogen levels required by, nuclear, military and ASME standards

Notes
• Use in temperature range -5 to 50°C
• Can be used with both type 1 (fluorescent) and type 2 (visible/ red contrast) NEOPEN family penetrant



Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Flawfinders

Solent Maintenance

SF3-500B, Flawfinder Developer, Aerosol, 500ml

3 Variations

Ambersil

No.3, Flawfinder Developer, Aerosol, 400ml

Ambersil

Freezer/2, Freezer Spray, Aerosol, 400ml

Ambersil

No.1, Flawfinder Cleaner, Aerosol, 400ml

Solent Maintenance

SF2-500B, Flawfinder Penetrant, Aerosol, 500ml

3 Variations

Ambersil

No.2, Flawfinder Penetrant, Aerosol, 400ml

Solent Maintenance

SF1-500, Flawfinder Cleaner, Aerosol, 500ml

3 Variations

Johnson & Allen

Neopen JAD-2, Flawfinder Developer, Aerosol, 400ml

Key Information

Policies

© 2024 Cromwell. All rights reserved.