Engineering Coating & Repair Products

Materials, Maintenance & Standard Parts

container_size

container_type

drying_time_

for_use_on

product_type

brand

categoryId

stockStatus

Maintenance & Repair

Devcon

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable.
Compressive strength: 57N/mm2.

Max. operating temperature: 121°C.
Pot life: 45mins.
Mix ratio: 9.0:1.

To be cured at room temperature and used as a steel filler, this grey plastic steel putty allows you to efficiently plug cracks or breakages where you would not be able to repair them by brazing or soldering. With the ability to bond to metals, concrete, and some plastics, it's a versatile product. It's also resistant to rust, oil, petrol, water and chemicals and is machinable. Available in two varying sizes to suit your needs and possesses a mix ratio of 2.5:1.

Features and Benefits
• Resistant to a host of materials including rust, oil, petrol, water and chemicals making it a robust product
• Available in two sizes depending on your needs
• Can be tapped, machined, drilled or painted once dry to suit your requirements
• Is an ideal way to repair and patch up areas that would not be able to be repaired using brazing or welding

Typical Applications
• Ideal for use in production, maintenance and many tooling applications where welding or brazing wouldn't be possible or beneficial
• Can be bonded to most metals and concrete as well as some plastics

Plastic Steel Putty (A)

Plastic Steel Putty (A), Tub, 500g

Machinable. Resistant to rust, CFCs and other chemicals. Bonds to other metals and thermoset plastics. 

Max. operating temperature: 121°C.
Pot life: 60mins. 
Mix ratio: 9.0:1.

This aluminium filled epoxy putty is suitable for machinable applications, is highly resistant to rust, CFCs and other chemicals and effectively bonds to other metals and thermoset plastics.

Features and Benefits
• Rust free properties ensures a long and effective hold
• Versatile use on any aluminium casings and materials

Typical Applications
• Engineering
• Plumbing

Aluminium Putty (F)

500gm "F" ALUMINIUM PUTTY

Araldite

This toughened epoxy paste is a beige/natural thixotropic with good gap filling properties.

Features and Benefits
• Ideal for bonding dissimilar substrates as is non sagging up to 10mm thickness
• Good resistance to chemical, water, heat and impact

Typical Applications
• Ferrous and non-ferrous metals
• Glass fibre reinforced polymer

Epoxy Paste, 50ml

Plastic Steel Putty (A), Tub, 1kg

Bronze-filled for refurbishing and maintaining equipment. Used on castings, bushings, shafts when brazing is not possible. Bonds to bronze, brass, ferrous metals and concrete. Easily machined, tapped and drilled. Max Operating Temperature: 121C. Pot Life: 35 minutes. Mix Ratio: 9.0:1.

Bronze Putty (BR)

500gm "BR" BRONZE PUTTY

Fast-curing, self levelling for low-cost moulds and dies.Reproduces fine detail.Excellent surface finish.Machinable to close tolerances.
Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Devcon high performance tooling and production epoxies provide a fast and economical method of manufacturing moulds, patterns and tools. They may be machined, drilled and tapping using conventional machine tools, while their properties allow accurate and detailed reproduction when cast over existing models.

Plastic Steel Liquid (B)
Fast-curing, self-levelling for low-cost moulds and dies. Reproduces fine detail. Excellent surface finish. Machinable to close tolerances. 

Max. operating temperature: 121°C.
Pot life: 45mins.
Mix ratio: 9.0:1.

Tooling & Production Epoxies

500gm "B" PLASTIC STEEL LIQUID

Stainless Steel Putty (ST) 
Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non-ferrous metals and concrete. FDA approved.

Compressive strength: 58N/mm2. 
Max. operating temperature: 121°C.
Pot life: 45mins. Mix ratio: 9.0:1.

Stainless Steel Putty (ST) 
Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non-ferrous metals and concrete.

Compressive strength: 58N/mm2. 
Max. operating temperature: 121°C.
Pot life: 45mins. Mix ratio: 9.0:1.

Maintenance & Repair Epoxies

500gm "ST" STAINLESS STEEL PUTTY

High-exothermic, non-rusting epoxy putty for use in wet environments and under water. Bonds securely to steel, iron, aluminium, brass, bronze, concrete, wood and plastics. Non-rusting, applies and cures in temperatures down to 4°C.

Compressive strength: 39N/mm2.
Max. operating temperature: 93°C.
Pot life: 45mins. Mix ratio: 1.40:1.

Wet Surface Repair Putty (UW)

500gm "UW" UNDERWATER REPAIR PUTTY

Steel filled, fast curing epoxy putty for durable emergency repairs. Rust resistant. Bonds to steel, iron, aluminium, brass and concrete at temperatures as low as 4°C.

Compressive strength: 72N/mm2.
Max. operating temperature: 93°C.
Pot life: 5mins.
Mix ratio: 1.7:1.

Plastic Steel 5-Minute Putty (SF)

500gm "SF" PLASTIC STEEL PUTTY

Devcon precision maintenance and repair epoxies allow fast, durable repairs to critical equipment. These are an economical way to repair and maintain a wide range of industrial equipment, improving its performance and extending service life.

Titanium Putty (HP)
Machinable. Repairs damaged equipment in hours. Resists rust, abrasion, high temperatures and chemicals. High compression strength. 
Compressive strength: 130N/mm2. 
Max operating temperature: 177°C. 
Pot life: 21mins. 
Mix ratio: 4.30:1.

Devcon® precision maintenance and repair epoxies allow fast, durable repairs to critical equipment. These are an economical way to repair and maintain a wide range of industrial equipment, improving its performance and extending service life. This titanium putty is a two part epoxy compound suited for use in an array of industries. The cured finish is fully machinable and has a compressive strength of 130N/mm2. The product has a maximum operating temperature of 177°C, a pot life of 21 minutes and a mix ratio of 4.30:1.

Features and Benefits
• Cured repairs can be drilled, tapped, machined, or painted allowing the repair to work seamlessly
• The product will not rust when cured for long lasting patch repairs
• The titanium putty is resistant to abrasion, high temperatures and chemicals
• Cost effective way of repairing parts instead of having to replace them

Typical Applications
• Plumbing
• Engineering
• Construction

Standards
• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Titanium Putty

500gm TITANIUM PUTTY

Release Agents Prevents compounds sticking to moulds.
Flexane Accelerator Shortens cure time of all Flexanes.
Flexane Primer For use in preparing substrates prior to bonding. FL10 - to metal. FL20 - to rubber. 
Cleaner - Blend 300 used on dirty materials.

For use with Flexane 80 liquid to produce a lower durometer (softer) castable urethane.

Flexane Accessories

112gm "FL-20" FLEXANE PRIMER

Flexane 94: Shore 94, relatively rigid. Max Operating Temperature: 82C. Pot Life: 10 minutes. Mix Ratio: 2.19:1.

Good for abrasion/tear resistant linings. Protects against vibration, shock and wear. Cost-efficient moulds (self-levelling).

Flexane 80 
Shore 80, some flexibility. 
Max. operating temperature: 82°C.
Pot life: 30mins. Mix ratio: 3.33:1. 

Flexane 94 
Shore 94, relatively rigid.
Max. operating temperature: 82°C.
Pot life: 10mins.
Mix ratio: 2.19:1.

Flexane Liquid

500gm FLEXANE 94 LIQUID

This aluminium filled Epoxy liquid is ideal for maintenance and repair work. Widely used for making moulds, patterns, and fixings, this liquid displays excellent strength and resistance to temperature.

Features and Benefits
• Excellent for moulds and reproducing fine detail for a cost-effective repair option
• Self-levelling for ease
• Displays non-shrink behaviour for professional results

F-2 Aluminium Liquid, 500gm

Epoxy, Coating & Repair, Drum, 500gm

Everbuild

Water Seal is a high performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebble-dashed and rendering. Based on the latest technology in silicone resins, Waterseal does not contain solvents harmful to the user or the environment and is non-flammable.

Size: 5.0ltr.

Water Seal is a high-performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebble-dashed and rendering. Based on the latest technology in silicone resins, Waterseal does not contain solvents harmful to the user or the environment and is non-flammable.

Features and Benefits
• Improves durability and beading effect
• Can be applied using a conventional garden spray
• Can be applied to damp surfaces
• Provides between 5 - 8 m² / litre depending on porosity and nature of surfaces being treated

Water Seal

Waterseal 5ltr

Rocol

    4 minute cure time and full use after just 1 hour
    Binds to a wide range of substrates: metal, glass, ceramic, concrete, fibreglass and wood
    Eliminates the need for welding and brazing
    Can be applied underwater.
    Permanent strength up to 23MPa and Temperature range up to +150°C

64012 Metal Repair Compound, 56gm

METAL REPAIR COMPOUND 56gm

Flexane 80: Shore 80, some flexibility. Max Operating Temperature: 82C. Pot Life: 30 minutes. Mix Ratio: 3.33:1.

500gm FLEXANE 80 LIQUID

A silicone adhesive/sealant compound for sealing, caulking, bonding and making gaskets. Used for electrically insulating, bonds to porous and non-porous substrates.

Silite Sealant

310gm "SILITE" SEALANT-CL EAR

112gm "FL-10" FLEXANE PRIMER

This 3M™ overspray masking liquid dry is a great water-based solution and is easy to clean by simply dissolving in water and washing off. This non-sticky overspray bonds within twenty minutes and is great for protecting a wide variety of surfaces. For best results it is advised to not leave vehicles exposed to sunlight whilst using this liquid. 

Features and benefits 
• Designed to protect all vehicle surfaces against auto paint and primer overspray
• Great for covering hard-to-mask surfaces
• Money saving and less time-consuming as there is no additional costs for liquid masking 
• Easy to protect hard-to-mask surfaces


Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Engineering Coating & Repair Products

Devcon

Plastic Steel Putty (A), Tub, 500g

2 Variations

Devcon

500gm "F" ALUMINIUM PUTTY

Araldite

Epoxy Paste, 50ml

Devcon

Plastic Steel Putty (A), Tub, 1kg

2 Variations

Devcon

500gm "BR" BRONZE PUTTY

Devcon

500gm "B" PLASTIC STEEL LIQUID

Devcon

500gm "ST" STAINLESS STEEL PUTTY

Devcon

500gm "UW" UNDERWATER REPAIR PUTTY

Devcon

500gm "SF" PLASTIC STEEL PUTTY

Devcon

500gm TITANIUM PUTTY

Devcon

112gm "FL-20" FLEXANE PRIMER

3 Variations

Devcon

500gm FLEXANE 94 LIQUID

2 Variations

Devcon

Epoxy, Coating & Repair, Drum, 500gm

Everbuild

Waterseal 5ltr

Rocol

METAL REPAIR COMPOUND 56gm

Devcon

500gm FLEXANE 80 LIQUID

2 Variations

Devcon

310gm "SILITE" SEALANT-CL EAR

Devcon

112gm "FL-10" FLEXANE PRIMER

3 Variations

3M

OVERSPRAY MASKING LIQUID DRY,06851, 5 GAL, 1 PER CASE

2 Variations

3M

OVERSPRAY MASKING LIQUID DRY, 15GAL, 1 PER CASE

2 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.