Multi-Tooth Annular Cutters

Power Tools

cutter_material

cutting_diametermm

depth_of_cut

shank_diameter

shank_type

type

brand

categoryId

stockStatus

newProduct

Consumables & Accessories

Rotabroach

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4” pilot bore and can be used in most magnetic drills. 700N/mm2 material hardness.
Standard Cutter Series
Depth of cut: 25mm.
Bore: 6mm.

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier and are more accurate than the conventional twist drills or drill bits. 
Compatible batteries - MLW2805460N, MLW2805560M, MLW2805545L.

Features and Benefits
• Cutters are made of super tough high-speed steel (M2 grade) with 3/4" Weldon shank compatible with all magnetic drills
• Accurate, symmetrical, fine finish hole cutting capabilities
• Reduced friction between the HSS core drill and the material
• Time and energy savings 

Typical Applications
• The ideal choice for all your magnetic drilling & cutting applications
• Designed for use in fabrication, construction, railways, petrochemical and any other applications when drilling ferrous metal, structural steel, plate, tubing or material that requires a fine finish hole 



HSS Type Annular Mag Drill Hole Raptor Broach Cutter Short

RAP140, Multi-Tooth Cutter, Short Series, 14mm x 25mm, 4 Teeth, M2 High Speed Steel

For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for ‘blind’ or ‘through’ pilot holes, pin will retract into cutter adaptor on ‘bottoming’.
Short Series = 12mm cutter. 
Long Series = 13 - 52mm cutters.
* For 12mm cutters only

For use with all multi-tooth milling cutters with 6mm bore. 

Features and Benefits
• Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter
• Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adaptor upon 'bottoming'

Notes
• Short Series = 12mm cutter
• For 12mm cutters only
• Long Series = 13 - 52mm cutters

Pilot Pins

Pilot Pin, 13-52mm x 25mm, Steel

RAP180, Multi-Tooth Cutter, Short Series, 18mm x 25mm, 6 Teeth, M2 High Speed Steel

Pilot Pin, 13-52mm x 50mm, Steel

RAP120, Multi-Tooth Cutter, Short Series, 12mm x 25mm, 4 Teeth, M2 High Speed Steel

RAP220, Multi-Tooth Cutter, Short Series, 22mm x 25mm, 6 Teeth, M2 High Speed Steel

RAP160, Multi-Tooth Cutter, Short Series, 16mm x 25mm, 4 Teeth, M2 High Speed Steel

Unibor

The Unibor® HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 30mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.

Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4inch Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor® geometry for optimum tool life and cutting speed

Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications

M2HSS Annular Cutters 30mm Depth

Multi-Tooth Cutter, Short Series, 14mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 40mm x 30mm, HSS M2

Pilot Pin, 12mm x 25mm, Steel

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Multi-Tooth Annular Cutters

Rotabroach

RAP140, Multi-Tooth Cutter, Short Series, 14mm x 25mm, 4 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

Pilot Pin, 13-52mm x 25mm, Steel

3 Variations

Rotabroach

RAP180, Multi-Tooth Cutter, Short Series, 18mm x 25mm, 6 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

Pilot Pin, 13-52mm x 50mm, Steel

3 Variations

Rotabroach

RAP120, Multi-Tooth Cutter, Short Series, 12mm x 25mm, 4 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

RAP220, Multi-Tooth Cutter, Short Series, 22mm x 25mm, 6 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

RAP160, Multi-Tooth Cutter, Short Series, 16mm x 25mm, 4 Teeth, M2 High Speed Steel

17 Variations

Unibor

Multi-Tooth Cutter, Short Series, 14mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 40mm x 30mm, HSS M2

51 Variations

Rotabroach

Pilot Pin, 12mm x 25mm, Steel

3 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.