Filler Wire

Welding, Brazing & Soldering

diametermm

product_material

brand

categoryId

stockStatus

TIG Welding

Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Sifalumin® No.15 is an aluminium alloy with 5% silicon, offering excellent flow characteristics and penetration. Has a lower melting point and more fluidity and is preferred by most welders because it "wets and flows better" and it's less sensitive to weld cracking when used on the 6xxx series base alloys. Available in a variety of diameters to suit your needs.

Features and Benefits
• Predominantly used during the TIG welding process (AC welding current)  
• Can be used Oxy Acetylene welding processes, (use the Sif No. 36 aluminium brazing and welding flux) 
• Weld will discolour if anodised
• Ensure that the parent metal surface is cleaned and fully degreased prior to welding and clean joints with a stainless steel brush

Typical Applications
• Suitable for welding duralumin cast (LM25) and wrought aluminium alloys such as 6063 (H9), 6061 (H20) and 6082 (H30)
• Welding on 6xxx series alloys typical applications include automotive/motorcycle frames, sports products - scooters/bicycles, general repair and maintenance

Standards
• EN ISO 18273  S Al 4043A (AlSi5)
• BS: 2901 4043A, (NG21)

No.15 4043 TIG Filler Rods

2.4mm Aluminium Welding Rod, 2.5kg

Esab

OK Autrod 4043 is one of the most widely used welding and brazing alloys and can be classified as a general-purpose filler alloy. The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodising. Non-heat treatable.

Ok Tigrod 4043 Aluminium 2.5KG Pack

Brazing Rod, Aluminium, 2.4mm

Molybdenum bearing stainless steel rod with low carbon content - corrosion-resistant for joining molybdenum bearing austenitic stainless steels. 
Applications: nuclear, chemical and food industries.

AWS 5.9 ER 316L

These molybdenum bearing stainless steel rods with a low carbon content are ideal for producing corrosion-resistant jins as well as for joining molybdenum bearing austenitic stainless steels. Available in a range of diameters to suit your requirements.

Features and Benefits
• Available in a range of diameters to suit your needs
• Produces quality, corrosion-resistant joins for durability

Typical Applications
• TIG Welding

Standards
• AWS ER-316L
• EN ISO 14343:2009 (E)
• ASME Section 2, Part C:2010
• SFA 5.9

Stainless Steel Welding Rods

Brazing Rod, Stainless Steel, 1.6mm

An oxygen/acetylene copper coated mild steel rod for all types of mild steel and wrought iron gas welding. Particularly suitable for welding sheet metal panels, plates and tubes.

AWS A5.2 R45 BS 1453 A1

These packs of Copper Coated Mild Steel (CCMS) welding rods are suited for all types of mild steel and wrought iron gas welding. Available in three diameters, al packs contain 5kg worth of welding rods to suit multiple applications.

Features and Benefits
• For use on all types of mild steel and wrought iron for versatility of use
• Recommended for use when gas welding with oxygen or acetylene for best results
• Available in three different diameters to suit your requirements

Typical Applications
• Particularly suitable for welding sheet metal panels, plates and tubes

Standards
• AWS A5.2 R45 BS 1453 A1

Welding Rods, Copper Coated Mild Steel

Brazing Rod, Copper coated mild Steel, 2.4mm

Brazing Rod, Stainless Steel, 2.4mm

Sifsteel Stainless 308L
BS 2901 : Part 2 : 1990 18/8-308L = 308S92 AWS A/SFA 5-9-93. Low carbon austenitic filler rod for welding steels of similar composition (18% Cr, 8%Ni). Use with argon shielding gas or argon/5% hydrogen.

All weights approximate.

Stainless steel filler rod suitable for welding 18/8 (304) austenitic stainless steels, providing good corrosion and wear resistance. 

Features and Benefits:
■ Good corrosion and wear resistance
■ Excellent resistance to general and intergranular corrosion up to 350°
■ good resistance to oxidising acids and cold reducing acids.   

Typical Applications:
■ ship building and offshore engineering
■ Pressure vessel and boiler industry
■ Construction work, repair and maintenance
■ Food processing industry, 
■ Refrigeration
■ petrochemical industry   











SifSteel Stainless Steel Welding Filler Rods - 308L

Sifsteel A15 - BS2901 AWS ER:70S-2. 
Copper coated triple deoxidised mild steel rod for Tig welding pipework etc. Particularly suited to Tig welding (with argon shielding gas) root runs in pipes. Can be used without flux for oxy-acetylene welding. Typical all-weld metal ultimate tensile strength 630N/mm2.

All weights approximate.

These steel welding rodes are manufactured from copper-coated triple deoxidised mild steel for a smooth and clean weld. Used with the TIG process it enables sound porosity free welds to be made on mild and low-alloy steels. 

Features and Benefits
• Particularly suited to TIG welding (with argon shielding gas)
• Performs well even on surfaces that have not been cleaned before welding
• Has a wide scale of application including pipe welding as well as root runs on heavy vessels
• Available in two sizes and specifications to suit your needs

Typical Applications
• Used primarily for single pass on steels
• Plumbing
• Suitable for use on mild and medium tensile steels and also ideal for rusty and mill-scaled plate

Standards
• EN ISO 636-A:2008 W2Ti

A15 Brazing Rods

Brazing Rod, Low Carbon Mild Steel, 2.4mm

Aluminium alloy with 5% silicon. Suitable for joining Duralumin, cast and wrought alloys. NB: weld will discolour if anodised. 
Applications: ship building, automotive and food industries, repair and maintenance.

AWS A5.10 ER 4043

Available in three varying diameters, this range of aluminium alloy welding rods come in handy packs of 2.5kg. Manufactured from a high quality aluminium alloy with 5% silicon, the product is suitable for joining Duralumin, cast and wrought alloys and has multiple applications within the automotive industry as well as being fit for  general purpose repair work.

Features and Benefits
• With a pack weight of 2.5kg you're guaranteed to have an ample amount of rods to fulfill your requirements 
• Manufactured to professional standards to ensure the product is safe and of the highest quality
• Available to purchase in three varying diameter depending on you needs

Typical Applications
• Ideal for use in the automotive and food industries as well as general repair and maintenance and also larger scale purposes such as ship building
• Suitable for joining Duralumin, cast and wrought alloys

Standards
• AWS : A5.10 ER 4043
• EN ISO 18273 S Al 4043A (Al Si 5)
• BS 2901 4043A (NG 21)

Notes
• Welding rods will discolour if anodised
• Images are for illustration purposes only, all products pictured are not supplied

Super 6 Aluminium Welding Rods

Welding Wire, Aluminium, 2.4mm

Brazing Rod, Low Carbon Mild Steel, 1.6mm

Sifsteel Stainless 316L
BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L = AWS A/SFA 5-9-93. Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

All weights approximate.

These Sifsteel Stainless 316L welding rods are ideal as a low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Designed for use with argon shielding gas or argon/5% hydrogen, the product is corrosion resistant for welding molybdenum bearing austenitic stainless steels and can be used for a variety of applications across industries including fabricating pipes and plates. Available in a range of sizes, all products are designed for applications where service temperatures do not exceed 400°C.

Features and Benefits
• Can be used in all positions except vertical for versatility of use
• Provides good resistance to pitting and crevice corrosion for overall longevity of weld joins
• Available in a variety of sizes to suit your requirements

Typical Applications
• TIG Welding

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Filler Wire

Sif

2.4mm Aluminium Welding Rod, 2.5kg

5 Variations

Esab

Brazing Rod, Aluminium, 2.4mm

2 Variations

SWP

Brazing Rod, Stainless Steel, 1.6mm

3 Variations

SWP

Brazing Rod, Copper coated mild Steel, 2.4mm

3 Variations

SWP

Brazing Rod, Stainless Steel, 2.4mm

3 Variations

Sif

Brazing Rod, Stainless Steel, 1.6mm

4 Variations

Sif

Brazing Rod, Low Carbon Mild Steel, 2.4mm

2 Variations

SWP

Welding Wire, Aluminium, 2.4mm

3 Variations

Sif

Brazing Rod, Low Carbon Mild Steel, 1.6mm

2 Variations

Sif

Brazing Rod, Stainless Steel, 2.4mm

8 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.