Die & Mould Indexable

Cutting Tools

coolant_delivery

cutting_edge_angle

depth_of_cut

head_type

insert_size

insert_style

maximum_cutting_diameter

milling_application

overall_lengthmm

series

shank_diameter

shank_thread_size

shank_type

toolholder_style

brand

categoryId

stockStatus

Milling

Indexable Cutter Bodies

Osaki

A range of optional accessories to suit the Osaki Mini Milling/Drilling Machine (OSA-271-5500K) are available.

A range of optional accessories to suit the Osaki MMD250 Mini Milling/Drilling Machine.

End Mil for Mini Milling/Drilling Machine

10046, End Mill, 1 Piece, For MMD250 Osaki Mini Milling/Drilling Machine

Kennametal

Kennametal Dodeka™ Face Mills are specifically engineered to deliver consistent performance in demanding rough and finishing face milling applications!
 Use less horsepower - and gain up to 30% in productivity.
 Up to 50% longer tool life.
 Easy-to-use - one screw enables fast, accurate indexing.
 12 true cutting edges lower your cost per edge.
 Run at higher speeds and feeds - with higher metal-removal rates.
 Three new cutter sizes and three new geometries, including a new Wiper insert.
 Engineered for applications requiring higher cutting speeds and feed rates with low cutting forces.
 Ideally suited for roughing and finishing face milling applications in the General Engineering and
Automotive industries.
 4.5mm depth-of-cut capability.
 Available in diameters from 40 - 315mm.
 Through-coolant standard.


For all technical specifications and inserts please refer to our catalogue.

Kennametal’s Dodeka™ Face Mill Program is specifically engineered to deliver consistent 
performance in demanding rough and finishing face milling applications!
• Use less horsepower – and gain up to 30% in productivity.
• Up to 50% longer tool life.
• Easy-to-use – one screw enables fast, accurate indexing.
• 12 true cutting edges lower your cost per edge.
• Run at higher speeds and feeds – with higher metal-removal rates.
• 4.5mm depth-of-cut capability.
• Available in diameters from 40 - 315mm. Full range details on request.
• Through-coolant standard.

Dodeka™ Indexable Shell Mills - Coarse Pitch - Metric

Dodeka™, KSHR80A06RS45HN09, Shell Mill

Indexable Cutter Spares

Sandvik Coromant

5513031-13 COUNTERSUNK HEAD SCREW

Iscar

EC-A2-M (rib processing): 2 flute, 30° helix solid carbide endmills. Used for rib processing on hard materials up to 55 HRc.

Grade : IC903
Steel.
ISO Range - P/M/K: (P05-P15)(M10-M20)
ISO Range - H/S/N: (H01-H10)(S10-S20)
Grade or Coating Type: PVD
Coating Layers: TiAlN

EC-A2 016-024/06C4M45 IC903 Milling Cutter

EC-A2 016-024/06C4M45 IC903 MILLING CUTTER

EC-B-4 
4 flute, 45° helix medium length solid carbide endmills.

Grade: IC900
A tough sub-micron PVD TiAlN coated grade. Suitable for medium to high cutting speed. Designed for machining of heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at interrupted cuts.
ISO Range - P/M/K: (P15-P40)(M20-M30)(K05-K25)
ISO Range - H/S/N: (H10-H25)(S15-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

EC-B-4 Milling Cutters, Grade IC900

EC120B25-4C12 IC900 MILLING CUTTER-5620737

FFT3 EFM-02
Small diameter endmills carrying single sided triangular inserts for fast feed milling. 
 
• Endmills to suit FFT3 TXMT 020105T one-sided triangular inserts with three cutting edges
• Tool cutting edge angle 14 ̊
• Maximum depth of cut 0.6 mm
• Positive rake angle for smooth and soft cut
• Ramping-down capability
• Internal coolant supply through the internal endmill body contributes to efficient lubrication of the cutting edge and facilitates the chip evacuation process
• As the insert is very small in size, it is placed in the pocket with the key T-6/5 Magnet 3x3


FFT3 EFM-02 NAN3FEED Small Diameter Endmills 

FFT3 EFM D08-2-060-C10-02 8.00MM NAN3FEED Small Diameter Endmills

FFT3 EFM D08-2-080-C12-02 8.00MM NAN3FEED Small Diameter Endmills

FFT3 EFM-03 NAN3FEED Small Diameter Endmills 

• Endmills to suit FFT3 WXMT 030206T one-sided trigon inserts
• Maximal depth of cut 0.6 mm
• 17° cutting edge angle
• Positive rake angle
• Ramping-down capability
• Coolant holes directed to each individual cutting edge, for an efficient coolant supply through the cutter body 

FFT3 EFM-03 NAN3FEED Small Diameter Endmills 

FFT3 EFM D10-2-080-C10-03 10.00mm NAN3FEED Small Diameter Endmills

FFT3 EFM D10-3-070-C10-02 10.00MM NAN3FEED Small Diameter Endmills

FFT3 EFM D10-3-090-C12-02 10.00MM NAN3FEED Small Diameter Endmills

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Die & Mould Indexable

Osaki

10046, End Mill, 1 Piece, For MMD250 Osaki Mini Milling/Drilling Machine

Kennametal

Dodeka™, KSHR80A06RS45HN09, Shell Mill

2 Variations

Sandvik Coromant

5513031-13 COUNTERSUNK HEAD SCREW

70 Variations

Iscar

EC-A2 016-024/06C4M45 IC903 MILLING CUTTER

Iscar

EC120B25-4C12 IC900 MILLING CUTTER-5620737

2 Variations

Iscar

FFT3 EFM D08-2-060-C10-02 8.00MM NAN3FEED Small Diameter Endmills

4 Variations

Iscar

FFT3 EFM D08-2-080-C12-02 8.00MM NAN3FEED Small Diameter Endmills

4 Variations

Iscar

FFT3 EFM D10-2-080-C10-03 10.00mm NAN3FEED Small Diameter Endmills

3 Variations

Iscar

FFT3 EFM D10-3-070-C10-02 10.00MM NAN3FEED Small Diameter Endmills

4 Variations

Iscar

FFT3 EFM D10-3-090-C12-02 10.00MM NAN3FEED Small Diameter Endmills

4 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.