Inspection Tags

Site Safety

colour

pack_quantity

type

brand

categoryId

stockStatus

Identification & Inspection

Sitesafe

A must for all ladders, kick stools and podiums.
• Regular and detailed inspections of ladders, both temporary and fixed, must be carried out.
• Laddertag® is robust and highly visible, displaying information on the ladder class and inspection period.
• The reverse of the insert displays a quick reference inspection checklist.
• Laddertag® Kit contains 10 holders, 10 inserts and one pen.
• We recommend that the Wallchart should be used to highlight safety awareness.

Robust and highly visible, the Laddertag® inserts allow for the latest information on-site ladder inspections to be logged and dated for safety auditing purposes.

Features and Benefits
• Up to 12 planned inspections
• Space for inspector signatures
• Each tag has a unique ladder reference
• The reverse of each tag has a handy ladder inspection checklist
• Available in packs of 10 or 50 to suit your needs

Standards
• BS EN 131

Laddertag® Inserts

Laddertag® Inserts - Pack of 50

N.B. Picture does not show all parts of the Scafftag Laddertag System. Picture is for illustration purposes only. For more detailed information please refer to our catalogue.

This pack of ten Laddertag® holders are robust and highly visible. An essential piece of signage to keep staff safe, this prohibition holder is designed to operate with Laddertag® inserts and other control procedures employed on site.

Features and Benefits
• Displays 'Do Not Use' message until an insert confirming the ladder's safety is added
• Permanently attaches to a ladder to ensure visible safety checks are in place
• Ensures clear communication with staff on safety

Laddertag® Holders, Pack of 10

Laddertag® Holders - Pack of 10

Centurion Europe

The Work at Height Regulations came into force in 2005.  These regulations apply to work at height where there is a risk of fall liable to cause personal injury.  This applies to both internal and external work at height, and includes below ground level and low height.

All ladders should be checked daily and prior to use for any damage, faults or wear and tear.  In addition they should be inspected at defined intervals as part of a risk assessment programme.  Use these inserts to manage the identification, safety, maintenance of ladders and help conform to the Work at Height Regulations 2005.

An OmniTag holder should be permanently fixed to the ladder in a suitable safe place.  Perform an inspection of the ladder (a checklist is printed on the reverse) and record the result on the tag.  If the ladder fails the inspection remove insert and inform a supervisor.

The OmniTag clearly states 'Do not use this equipment' when the tag is removed.

Ladder Tag Inserts

Ladder Tag Inserts - Pack of 10

Brady

Tagout is the placement of a tag, which indicates that the energy-isolating device and the equipment being controlled MUST NOT be operated until the tag has been removed. Used to indicate who is responsible for placing a Lockout device and who is authorised to remove it or make changes to it. 
The tags are manufactured from flexible polyester, resistant to water, oil and extreme temperatures. Their matt surface allows you to write on them easily with a ball point or felt-tip pen. Other text versions available on request.
Pack of 10 tags with cable ties. Size: 75 x 160mm.

Tagout - Warning Tags

265548 LOCK OUT TAGS DO NOT OPERATE (PK-10)

Ladder Tag Inserts - Pack of 50

Laddertag® Inserts - Pack of 10

Matlock

Highly visible warning tags. Should be applied alongside a lockout device to provide details of the lockout procedure. Flexible polyester tags, resistant to water, oil and extreme temperatures. Matt surface allows you to write on them. 
Pack of 10 tags with cable ties. 


Lockout Warning Tags - Double-Sided

LOCKOUT TAGS DO NOT USE (PK-10)

The most popular status management system for electrical testing.
• Enables maximum visibility with minimal attachment space, the tags are a heavy-duty alternative to labels which are prone to damage in industrial environment.
• The holder displays 'DO NOT USE EQUIPMENT' prior to inspection when a choice of three colour inserts are available to use..
• The holder can be attached to the equipment with adhesive or to the power lead with cable ties.
• Plant &  Machinery Microtag® Kit contains 20 holders, 40 cable ties (150mm long) and 1 pen. Inserts are available separately.

- The most popular status management system for electrical testing.
- Made of durable polypropylene, can be written on and then wiped clean for increased re-usabilty
- For use with our Microtag® Holders
- Complies with legislative requirements 

Microtag® Inserts - Pack of 20

Microtag® Green Inserts - Pack of 20

This can be used on a multitude of applications, from asset identification through to inspection. Manufactured from an extremely durable TPU (polyurethane) they are flexible, extremely durable and suitable for use in any weather conditions. In addition they are resistant to high and low temperatures and to most acids, alkali and solvents. The integral slots allow the tag to be fastened through itself at two positions to suit the individual application. Available in 8 colours either plain, pre-printed from the selection opposite or with your own graphics, they can be written on using apermanent marker or even a standard ball point pen.

• Flexible and durable
• Weatherproof
• Range of colours
• Single or double sided
• Custom print available

AssetTag Flex Do Not Use Tags

TGF0501R AssetTag Flex - Do Not Use 1 - Red - Single

Flexible polyester tags, resistant to water, oil and extreme temperatures. Matt surface allows you to write on them. 
Pack of 10 tags with cable ties. 
Size: 75 x 135mm.

LOCKOUT TAGS DO NOT START (PK-10)

SCAFFOLD TAG INSERT

The AssetTag flex inspection tags can be used on a multitude of applications, from asset identification through to inspection. Manufactured from an extremely durable TPU (polyurethane) they are flexible, extremely durable and suitable for use in any weather conditions. In addition they are resistant to high and low temperatures and to most acids, alkali and solvents. The integral slots allow the tag to be fastened through itself at two positions to suit the individual application. 

Features and Benefits
• Made from flexible and durable polyurethane for use in a variety of applications
• Self-fastening at two points for convenience
• Weatherproof and resistant to heat and cold for use in a range of weather conditions
• Available in a range of colours to suit requirements
• Single or double sided
• Can be written on using a permanent marker or ball-point pen
• Resistant to most acids, alkalis and solvents to suit applications in a variety of industries

AssetTag Flex Inspection Tags

TGF0201R AssetTag Flex - Inspection 2 - Red - Single

UNIVERSAL INSPECTION TAG INSERT(PK-10)

Isotag® is a complete tagging system to help control mechanical and electrical isolation procedures.
• Current operational status is instantly visible to all individuals.
• Prevents the inadvertent energising of a system, reducing the potential for accident.
• Two-part perforation allows tag to remain on asset with permitting authority holding detached section.
• Both parts can be consolidated when task has been completed.

Isotag® is a complete tagging system to help control mechanical and electrical isolation procedures.
• Current operational status is instantly visible to all individuals.
• Prevents the inadvertent energising of a system, reducing the potential for accident
• Two-part perforation allows the tag to remain on the asset with permitting authority holding detached section
• Both parts can be consolidated when the task has been completed

Isotag® Isolation Tags

Isotag® Isolation Tags - Pack of 50

Microtag® Yellow Inserts - Pack of 20

N.B. Picture does not show all parts of the Scafftag Scafftag System. Picture is for illustration purposes only. For more detailed information please refer to our catalogue.

A holder with 'Do not use Scaffold' prohibition status for both tube and clip system scaffolding to operate with the Scafftag® inserts and other control procedures employed on site.

Scaffold Holders - Pack of 10

UNIVERSAL INSPECTION TAG INSERT

An essential product for any organisation that is committed to ensuring ladder safety, this tool streamlines safety inspections and helps promote ladder maintenance.

Features and Benefits
• 50mm x 181mm
• User friendly design which allows the inspectors to mark their date of inspection along with their signature or initials
• Improves maintenance planning for ladders
• Enhances accountability for those that have inspected and encourages a culture of safety within the organisation

Typical Applications
• Construction
• Industrial
• Commercial and retail


Ladder Safety Tag Insert, 50mm x 181mm

LADDER SAFETY TAG INSERT

TGF0550R AssetTag Flex - Do Not Use 1 - Red - Pack of 50

Self adhesive vinyl labels, supplied on a roll. Suitable for most applications. 250 labels per roll.

A range of labels perfect for managing your company's maintenance and warehouse procedures.
A choice of two materials:
1. Self-adhesive vinyl - hard wearing, adhesive labels that are suitable for most applications. 250 labels per roll.
2. Vinyl cloth - highly versatile and adheres to most surfaces. These firmly adhering labels can be deliberately removed on several occasions. 250 labels per roll.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Inspection Tags

Sitesafe

Laddertag® Inserts - Pack of 50

2 Variations

Sitesafe

Laddertag® Holders - Pack of 10

Centurion Europe

Ladder Tag Inserts - Pack of 10

2 Variations

Brady

265548 LOCK OUT TAGS DO NOT OPERATE (PK-10)

3 Variations

Centurion Europe

Ladder Tag Inserts - Pack of 50

2 Variations

Sitesafe

Laddertag® Inserts - Pack of 10

2 Variations

Matlock

LOCKOUT TAGS DO NOT USE (PK-10)

4 Variations

Sitesafe

Microtag® Green Inserts - Pack of 20

3 Variations

Centurion Europe

TGF0501R AssetTag Flex - Do Not Use 1 - Red - Single

5 Variations

Matlock

LOCKOUT TAGS DO NOT START (PK-10)

4 Variations

Centurion Europe

SCAFFOLD TAG INSERT

Centurion Europe

TGF0201R AssetTag Flex - Inspection 2 - Red - Single

2 Variations

Centurion Europe

UNIVERSAL INSPECTION TAG INSERT(PK-10)

Sitesafe

Isotag® Isolation Tags - Pack of 50

2 Variations

Sitesafe

Microtag® Yellow Inserts - Pack of 20

3 Variations

Sitesafe

Scaffold Holders - Pack of 10

Centurion Europe

UNIVERSAL INSPECTION TAG INSERT

Centurion Europe

LADDER SAFETY TAG INSERT

Centurion Europe

TGF0550R AssetTag Flex - Do Not Use 1 - Red - Pack of 50

5 Variations

Sitesafe

PASSED VINYL LABEL 25x40m m S/ADH (ROLL-250)

16 Variations

Sitesafe

SERVICE RECORD VINYL LABEL 25x40mm

16 Variations

Centurion Europe

UNI.INSPEC. TAG INS.KIT(10 ASSETTAG HOLDERS,10 INSERTS,1 PEN)BOXED

Centurion Europe

NEXT TEST MINITAG INS.KIT-BLUE(20ASSETTAG HOLDERS,40 INS.,1 PEN)

Centurion Europe

PAT TESTING MINI TAG INS.KIT-RED(20 ASSETTAG HOLDERS,40 INS,1PEN)

Centurion Europe

FORKLIFT TAG INSERTS (PK-10)

Key Information

Policies

© 2024 Cromwell. All rights reserved.